Ar-15 20rd Pmag Gen M3 Magazine 223/5.56 Magpul.
Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience
PMAG 20 GEN M3 brings all the GEN M3 enhancements of the 30-round model to the compact 20-round form factor. Departing from the previous PMAG 20 standard, the GEN M3 features a curved body with the same constant-curve geometry of the 30 round model. This not only helps ensure more reliable feeding, but it gives you a shorter mag that’s easier to handle in the prone position.
AR-15, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:067
Sinclair, Issue:5B, Page:247
SPECS: Impact/crush-resistant molded hard polymer. Compatible with AR-15/M4/M16, HK® 416, MR556A1, M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and other similar lowers. 5.56mm/.223 ammunition only.
Magna-Tip Super Sets™ Brownells.
Screwdrivers to Precisely Fit Virtually Any Gun Screw Slot, 44 Custom Bits, 9 Shank Sizes
Every gunsmith knows no two screw slots are ever exactly the same. Because so many factories use outside vendors for screws, slot sizes can vary, even within the same model of gun. If you want to be professional about your work, you custom grind each bit to the correct size, a frustrating and time-consuming task without a Super Set.
The Super Set comes in graduated 22-bit, 44-bit, and 58-bit configurations, so you’ll always have a screwdriver blade that precisely fits the size and width of virtually any screw slot. You get flat blades in 9 different widths from .120" to .360", each with four to six blade thicknesses from .030" through .070" in .005"or .010" increments. Each 1½" long bit is marked with its blade width and relative thickness number, 3 for thinnest, 4 for next thicker, etc.
The 22 Bit Starter Super Set eases you into the powerful Super-Set concept with the 22 straight bits (#120-3, #120-5, #150-4, #150-6, #180-3, #180-5, #210-4, #210-6, #240-3, #240-5, #240-7, #270-4, #270-6, #300-3, #300-5, #300-7, #340-4, #340-6, #340-8 ,#360-3, #360-5, #360-7), your choice of one handle, and the heavy duty box, and tray. When you’re ready to expand your set, the Super Set Add-On Pak lets you upgrade it to the same configuration as the 44-bit Super Set.
The 44 Bit Super Set Plus has all 44 slotted screws below (#120-3, #120-4, #120-5, #120-6, #150-3, #150-4, #150-5, #150-6, #180-3, #180-4, #180-5, #180-6, #210-3, #210-4, #210-5, #210-6, #210-7, #240-3, #240-4, #240-5, #240-6, #240-7, #270-3, #270-4, #270-5, #270-6, #270-7, #300-3, #300-4, #300-5, #300-6, #300-7, #340-3, #340-4, #340-5, #340-6, #340-7, #340-8, #360-3, #360-4, #360-5, #360-6, #360-7, #360-8), one handle of your choice, a Stubby Handle (just the ticket for working in tight places), and the heavy duty box and tray.
The 58 Bit Master Super Set Plus adds 10 hex-head bits (#185-9, #185-10, #185-00, #185-0, #185-1, #185-2, #185-3, #185-4, #185-5, #185-6), 3 Phillips-head bits (#440-1, #440-2, #440-0), and a 1/8" square bit for Remington buttplates to the contents of the 44 Bit Super Set Plus. It's the most incredible screwdriver system you will ever use!
Big Book Catalog, Issue:71, Page:432
SPECS: Bits: Slotted- 1½" (3.8cm) long. Allen (Hex) Bits - 1" (2.5cm) or 1¼" (3.17cm) long. Phillips Bits - 1" (2.5cm) long. Handle: 1" (2.5cm) diameter, 8" (20.3cm) long.
Sb Pdw Adjustable Pistol Stabilizing Brace Sb Tactical.
Helps You Control Your AR Pistol Just Like the Original "Brace"; Adjustable Length To Fit Different Shooters
SB Tactical's SBPDW Adjustable Pistol Stabilizing Brace adds a new dimension to "The Brace" - three-position length adjustment. Just like the original brace, the SBPDW can be strapped comfortably around your forearm to give you better control of your AR-15 pistol so you can shoot it more accurately one-handed. (Helps prevent fatigue during long range sessions, too.)
Also like the original, the SB Tactical SBPDW Adjustable Pistol Stabilizing Brace can shouldered like a traditional stock for a third point of contact to stabilize the pistol when taking fast shots. And the adjustable length lets you set up a fit that's just right for you.
- 3 pre-set length positions
- Pistol buffer tube is built in
- Compatible with M4-carbine type buffer and standard mil-spec bolt/carrier group
- Nylon strap adjusts for comfortable, custom fit
The SB Tactical SBPDW Adjustable Pistol Stabilizing Brace helps you get maximum enjoyment from shooting your AR-15 pistol.
Big Book Catalog, Issue:71, Page:050
Ar-15 Tt-Ar-15 Triggers Adjustable Triggertech.
TriggerTech produces a trigger that drastically changes functionality by using a roller. Other trigger designs play with pivots and polishing to try to attain the best break possible. TriggerTech uses patented Frictionless Release Technology™ that distinctly improves feel and accuracy. It uses rolling friction leading to unparalleled performance. Drop-in design for lowers with .154” pins.
- Short two-stage
- Curved or straight trigger
- Zero Creep Release provided by Frictionless Release Technology™
- Adjustable from 2.5 to 5 lbs with a patent pending design
- Enhanced Reset Control™ with sub .030” reset
- Hammer, Sear and Trigger are all Stainless Steel and all other components are corrosion resistant
Big Book Catalog, Issue:71, Page:031
870 Tac-14 12ga 4+1 Shockwave Grip Remington.
A Truly Compact, Fast Handling Personal Defense Shotgun
With its 14" barrel and compact 26.4" overall length, the Remington 870 TAC-14 is extremely maneuverable and delivers plenty of 12 gauge stopping power. Built on the proven, all-steel 870 receiver, the little TAC-14 is handy in tight places, especially where there isn’t enough room to effectively use a full-sized shotgun. It’s even compact enough to make a dandy truck gun.
The 870 TAC-14 sports a "bird’s head" Shockwave Raptor pistol grip that helps take the bounce out of recoil, ensuring you have excellent control of the gun, shot after shot. Rounding out the TAC-14 is a Magpul® MOE® forend with M-LOK accessory-mounting points, plus extended front and rear handstops that further enhance your control of the TAC-14.
- NO NFA registration or tax stamp required!
- Chambered for 2-3/4" and 3" shotshells and slugs
- Fixed choke
- Durable reinforced polymer stock
- Bead front sight
The Remington 870 TAC-14 is not classified as a “shotgun,” “short barrel shotgun,” or “any other weapon” under the NFA, so it is not subject to federal Class 3/NFA firearms restrictions and is simply classified as a “pump-action firearm.” This is because its overall length is greater than 26", and it is not capable of being shouldered, meaning the TAC-14 can be purchased without an ATF NFA registration or tax stamp. State and local restrictions may still apply.
Ar-15 Hipertouch® Series Trigger Assemblies Hiperfire.
Breathtakingly Smooth, Light Pull With Plenty of Hammer Oomph
Hiperfire’s revamped Hipertouch® trigger line gives the AR-15 shooter an impressive array of options in a single-stage trigger with shorter pre-travel, faster reset, and increased hammer energy than the standard G.I.-type trigger. Dual coil springs across the top of the Hiperfire® trigger reduce friction on the sear and increase hammer striking power by 35% over a "mil-spec" trigger, while a pair of interchangeable color-coded springs let you choose between a 2.5 lb. or 3.5 lb. pull weight.
Of course, all the Hipertouch® models give your AR-15 a smooth, consistent pull with just a hint of creep, a snappy break, and a very short over-travel, followed by fast reset so you’re ready to take the next shot. A Hipertouch® trigger in your AR-15 will help you improve your shot timing, control, and confidence for more accurate hits on the target.
The Hipertouch’s consistent pull doesn’t signal hammer release like some triggers, so the shooter doesn’t develop a flinch in anticipation of the rifle firing. The shooter can stay relaxed and doesn’t build tension in the trigger finger. All of this adds up to better control over the gun, better shot timing, improved confidence and more accurate shooting.
- Consistent single-stage pull with a just a hint of "creep"
- 2 interchangeable hammer springs provide 2 pull weigh options - 2.5 lb. or 3.5 lb.
- NO fussy setscrews that can back out or otherwise lose your settings
- Unusually fast locktime
- Hard, positive hammer strikes without compromising pull weight
- Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers
- 6 models to choose from - read on...
Genesis is the Hipertouch® base model, an excellent upgrade for law enforcement, military, service rifle competition shooters, and personal defense.
Auto offers same functionality as Genesis for select-fire full-auto M16 / M4-type rifles. Built like the proverbial tank to handle the punishment of fast-cycling operation.
Elite is a match-quality trigger that breaks quickly, after even shorter pre-travel than the Genesis, with very quick, positive reset. Letoff is extremely easy to control.
Competition is ideal for competitive shooters who want the bare minimum of pre-travel and a straight trigger shoe. The adjustable finger pad gives you even more refined control. It can be set at five different positions for further refinement of pre-travel and trigger weight. Position the shoe farther down the bow to increase leverage and effectively reduce pull weight. The result is effectively 10 pull weight options rather than two. Or leave the pad off and enjoy the enhanced tactile control of a straight trigger.
Reflex is similar to Competition but with a traditional curved trigger shoe - same trigger pull with virtually no creep. Excellent for Designated Marksman rifles, LE use, and 3-gun competition.
Eclipse is the ultimate Hipertouch® trigger, with all the upgrades of the Competition model, including straight shoe and adjustable finger pad plus Hiperfire’s Nickel Bliss electroless Nickel Boron (NiB) finish on all contact surfaces for enhanced corrosion protection and, more importantly, an EVEN SMOOTHER feel than its Hipertouch® siblings. This pull is so smooth, clean, and consistent you’ll think the laws of physics have been broken. They haven’t.
Big Book Catalog, Issue:71, Page:030
D752 Decelerator Recoil Pad Pachmayr.
Old English Black Base
Classic, smooth-sided pad made from famous Decelerator rubber. Features tapered, internal ribbing. Solid base, no white line.
Big Book Catalog, Issue:71, Page:404