Romeo5 Compact Red Dot Sight Sig Sauer.
The ROMEO5 features SIG's MOTAC™ (Motion Activated Illumination) which increases battery life by shutting down the system when not in use and instantly activates the system when it senses the slightest vibration or movement. Your sight will be up when you go into action. The ROMEO5 will mount on any platform and the solid aluminum design will give peak performance and years of service. Military units trust the ROMEO5 when it counts, so why wouldn’t you?
The ROMEO5 Compact Red Dot Sight provides the civilian and armed professional with a robust 1x aiming solution optimized for today’s MSR/AR platforms.
- The ROMEO5 combines a leading edge optical design with an extremely robust, lightweight aluminum housing for years of worry-free service at a competitive price point
- The 2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions
- Features our MOTAC™ (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced battery life
- The readily available CR2032 battery is side-loading, allowing for quick battery replacement without having to remove the sight from the firearm
- An integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
- Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
- Includes a M1913 Picatinny low mount riser and co-witness 1.41” and 1.63” riser mounts.
10/22® Bx-Trigger Ruger.
The 10/22® BX-Trigger™ features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel. Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install. The BX-Trigger™ features a Polymer construction and drop-in installation. Fits Ruger® 10/22® rifles or 22 Charger Pistol.
DO NOT DRY FIRE UNLESS A HAMMER BLOCK IN INSTALLED OR TRIGGER IS INSTALLED IN A RUGER® 10/22® RIFLE.
Big Book Catalog, Issue:71, Page:154
Ar-15 30rd Pmag Gen M2 Moe Magazine 223/5.56 Magpul.
Dependable & Nearly Indestructible; Store Fully Loaded Without Loss Of Reliability
Exceptionally rugged, combat- and competition-ready magazine functions flawlessly, even when left fully loaded for extended periods. Corrosion-proof, self-lubricating one-piece body of fiber-reinforced, molded polymer has no spot welds or joints to impair the follower, and the constant internal curve ensures smooth, unobstructed movement of the round stack. Anti-tilt follower stabilizes the stack to help prevent nose-diving and bolt-over-head failures. Heat-treated, stainless steel spring is stress-relieved for optimal performance. Withstands the heat from prolonged full-auto fire and is not harmed by most bore cleaners and solvents. Exterior ribbing provides added gripping surface; magazine catch notch, rather than a traditional hole, keeps dirt and debris out. Easy-to-grasp ledge on floorplate aids in extracting magazine from pouches; floorplate removes easily for cleaning. All models available in Black. DO NOT COME WITH DUST COVERS.
AR-15, Issue:11, Page:060
Big Book Catalog, Issue:71, Page:067
SPECS: Molded polymer, stainless steel spring. 30-round capacity. Available in Black.
Agent Night Sight Set For Glock® Ameriglo.
Duty/Carry Sights for Operation in Any Light Conditions
AmeriGlo’s Agent night sight set for Glock® is a major step forward in night sight design that delivers improved visibility and faster sight acquisition in any lighting conditions. These are low-profile, fixed sights designed to meet the daily carry needs of law enforcement officers. In fact, Agent sights were recently selected by a large federal law enforcement agency as its carry sight of choice.
AmeriGlo Agent sights for Glock® employ the proven 3-dot configuration preferred by many experienced shooters. The ProGlo style front blade has a vivid green Tritium lamp surrounded by a bright orange outline, so there’s no trouble identifying your front sight under stress. The fixed rear sight has a rounded U-notch flanked by two green Tritium lamps with subdued black outlines.
- Drop-in replacements for factory sights
- Swiss-made self-illuminating Tritium lamps are backed by a 12-year warranty
- Rear U-notch (all): .165" wide
- Front sights: .140" wide (G42,43 is .125" Wide)
- Glock® 9mm/.40 S&W/.357 SIG front: .180" high
- Glock® 10mm/.45 ACP front: .165" high
- Glock® 42/43 front: .190" high
- Gen5 sights fit all models of Glock Gen5 pistols ONLY (front: .200" high)
AmeriGlo Agent night sights are machined from high-grade steel barstock, dehorned to prevent snagging on your clothing during the draw, and given a durable, non-reflective black finish to match your Glock’s slide. Even so, the rear sight body is shaped to support one-handed slide racking in an emergency.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:316
Gen 5 Magazine For Glock® G17/19x Glock.
Factory Spares for Your Gen5 - Also Compatible With Earlier "Gens"
These are genuine Glock® factory replacement magazines for Gen5 Glock® 17 / 19X / 34 pistols. A hardened steel insert encased in slick, wear-resistant polymer gives each Gen5 magazine impressive strength and durability. The difference is the polymer for these mags is molded in Glock’s desert-ready Coyote color.
You can choose between a standard (for full-size 9mm Glocks) 17-round capacity or a 19-round capacity. Competition shooters, law enforcement folks, and tactical operators will love the "Plus 2" option!
Inside, the contrasting black follower makes keeping track of load status through the plentiful witness holes easier, while the extended, angled baseplate helps with those fast magazine changes.
- Correct, factory-original spare mag for your 9mm Gen5 pistol
- Available with standard 17-rd or 19-rd capacity
- "Desert" color matches the 19X pistol frame & slide
- Black self-lubricating polymer follower
- Witness holes on rear face
These Glock® 17 / 19x / 34 magazines are contoured at the base to match the flared magwell of Gen5 pistols, yet are still fully compatible with earlier-generation pistols.
Rmr Cut Slide For Gen3 Glock® 9mm Brownells.
Stainless Steel Slide With a Bundle of Custom Features
Brownells Front Cut RMR Slides for Glock® pistols feature a distinctive, wraparound serration pattern that aids in manipulating the slide, especially when checking the chamber. (OK, we’ll admit it: the serrations look cool, too.) They also come with a pre-cut slot for easy, secure, low-profile mounting of a Trijicon RMR sight. All slides equipped with standard Glock sight cuts for front and rear sights of your choice. If the RMR is in place, suppressor height sights are required.
In addition, you can get your Front Cut RMR Slide with an optional "window" cutout on top between the front serrations that reduces weight and enhances airflow to keep the barrel cooler - ideal for hard-working action competition pistols.
Each Front Cut RMR Slide starts life as a billet of 17-4 stainless steel that is machined to Glock® factory specifications inside, so it’ll fit factory frames and accept factory or aftermarket barrels and parts.
- Fits Gen3 Glock® 17 and 19 pistols & components
- Available with distinctive top window cutout or traditional solid top
- Machined from corrosion-resistant 17-4 stainless steel billet
- Heat Treated to 41-44 on the Rockwell C scale
- Given a wear-resistant matte black Nitride finish
- Pre-cut Trijicon RMR mounting slot, plus factory front/rear sight cuts
A Brownells Front Cut RMR Slide is the ideal upgrade for your factory Glock 17 or 19 pistol - and the perfect top half for a new custom gun built on an 80% frame.
Channel liner required for these slides. Channel liners are a press fit and require a tool to install.
Big Book Catalog, Issue:71, Page:214
Ar-15 Super Sport Trigger Rise Armament.
Shrink Your AR s Groups With A Cost Effective Single Stage Trigger
The Rise Armament Super Sporting Trigger is one of the most cost effective trigger on the market for AR based rifles.
- Precision CNC machined from high quality, heat treated tool steel and aluminum
- Single stage 3.5 pound trigger break
- Unit weight: 2.3 ounces.
You can easily replace the factory Mil-Spec unit with the Rise Armament Super Sporting Trigger, a precision CNC machined drop in trigger that boasts a crisp, clean 3.5 pound trigger break.