Buy at this store.See Detail Online And Read Customers Reviews Ar-15 Hipertouch® Series Trigger Assemblies Hiperfire prices over the online source See people who buy "Ar-15 Hipertouch® Series Trigger Assemblies Hiperfire" Make sure the store keep your private information private before buying Ar-15 Hipertouch® Series Trigger Assemblies Hiperfire Make sure you can proceed credit card online to buyAr-15 Hipertouch® Series Trigger Assemblies Hiperfire additionally the store protects your information from fraudulents Make sure the customer support is always there to aid you when you place Ar-15 Hipertouch® Series Trigger Assemblies Hiperfire order with them
Ar-15 Hipertouch® Series Trigger Assemblies Hiperfire.
Breathtakingly Smooth, Light Pull With Plenty of Hammer Oomph
Hiperfire’s revamped Hipertouch® trigger line gives the AR-15 shooter an impressive array of options in a single-stage trigger with shorter pre-travel, faster reset, and increased hammer energy than the standard G.I.-type trigger. Dual coil springs across the top of the Hiperfire® trigger reduce friction on the sear and increase hammer striking power by 35% over a "mil-spec" trigger, while a pair of interchangeable color-coded springs let you choose between a 2.5 lb. or 3.5 lb. pull weight.
Of course, all the Hipertouch® models give your AR-15 a smooth, consistent pull with just a hint of creep, a snappy break, and a very short over-travel, followed by fast reset so you’re ready to take the next shot. A Hipertouch® trigger in your AR-15 will help you improve your shot timing, control, and confidence for more accurate hits on the target.
The Hipertouch’s consistent pull doesn’t signal hammer release like some triggers, so the shooter doesn’t develop a flinch in anticipation of the rifle firing. The shooter can stay relaxed and doesn’t build tension in the trigger finger. All of this adds up to better control over the gun, better shot timing, improved confidence and more accurate shooting.
- Consistent single-stage pull with a just a hint of "creep"
- 2 interchangeable hammer springs provide 2 pull weigh options - 2.5 lb. or 3.5 lb.
- NO fussy setscrews that can back out or otherwise lose your settings
- Unusually fast locktime
- Hard, positive hammer strikes without compromising pull weight
- Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers
- 6 models to choose from - read on...
Genesis is the Hipertouch® base model, an excellent upgrade for law enforcement, military, service rifle competition shooters, and personal defense.
Auto offers same functionality as Genesis for select-fire full-auto M16 / M4-type rifles. Built like the proverbial tank to handle the punishment of fast-cycling operation.
Elite is a match-quality trigger that breaks quickly, after even shorter pre-travel than the Genesis, with very quick, positive reset. Letoff is extremely easy to control.
Competition is ideal for competitive shooters who want the bare minimum of pre-travel and a straight trigger shoe. The adjustable finger pad gives you even more refined control. It can be set at five different positions for further refinement of pre-travel and trigger weight. Position the shoe farther down the bow to increase leverage and effectively reduce pull weight. The result is effectively 10 pull weight options rather than two. Or leave the pad off and enjoy the enhanced tactile control of a straight trigger.
Reflex is similar to Competition but with a traditional curved trigger shoe - same trigger pull with virtually no creep. Excellent for Designated Marksman rifles, LE use, and 3-gun competition.
Eclipse is the ultimate Hipertouch® trigger, with all the upgrades of the Competition model, including straight shoe and adjustable finger pad plus Hiperfire’s Nickel Bliss electroless Nickel Boron (NiB) finish on all contact surfaces for enhanced corrosion protection and, more importantly, an EVEN SMOOTHER feel than its Hipertouch® siblings. This pull is so smooth, clean, and consistent you’ll think the laws of physics have been broken. They haven’t.
Big Book Catalog, Issue:71, Page:030
D752 Decelerator Recoil Pad Pachmayr.
Old English Black Base
Classic, smooth-sided pad made from famous Decelerator rubber. Features tapered, internal ribbing. Solid base, no white line.
Big Book Catalog, Issue:71, Page:404
Ar-15 Velocity Trigger Curved Velocity Triggers.
The Velocity Trigger for AR-15 rifles is a Single Stage Drop-In Trigger that provides a nice, clean & crisp trigger pull. The attractive price makes a quality AR-15 trigger achievable with any budget. Simple installation makes the process easy & quick. Available with a 3, 4 or 4.5lb trigger pull. These feature a curved trigger.
Recommend using: Anti-Walk Pins Part# 452-015-028
Not to be used with 9mm conversions or other recoil operated conversions.
Big Book Catalog, Issue:71, Page:031
Ar-15 Ctr Stock Collapsible Mil-Spec Magpul.
Locking System Eliminates "Play"
Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Available in Black, Dark Earth, and O.D. Green, so you can match the color of your stock to your tactical rifle's color scheme. Mil-Spec fits smaller 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec carbines.
AR-15, Issue:11, Page:045
Big Book Catalog, Issue:71, Page:049
SPECS: Impact-resistant nylon polymer, Black, Dark Earth or O.D. Green.. LOP adjustment range, 3½" (8.9cm). Mil-Spec - 67⁄8" (17.5cm) OAL, 5¼" (13.34cm) high. Fits fits mil-spec 1.14" O.D. carbine buffer tubes.
M16 5.56 Bolt Carrier Group Tin Mp Brownells.
Add Aesthetic Durability to Your AR-15
Adding aftermarket components to an AR-15 doesn't have to be about practicality and utilitarianism. Sometimes, the look of a finished rifle plays into the selection of components. Get an eye-catching design in your rifle with the addition of the Brownells TiN M16 Bolt Carrier Group.
The Brownells TiN M16 Bolt Carrier Group provides AR owners with both rugged durability and an incredibly stunning look, thanks to the bright gold titanium-nitride finish used on the surface of the carrier and bolt. The carrier is made using 8620 tool steel, while the bolt head is machined from durable 9310 tool steel. The bolt is magnetic-particle inspected to ensure that consumers get the best-possible components, and the carrier itself is heat-treated for added durability.
- Bolt-carrier group weighs 12 ounces
- Designed for use in 5.56 NATO, .223 Rem., .300 Blackout and .204 Ruger AR-15s
- Includes M16 carrier notch for reliable performance in full-auto rifles
The Brownells TiN M16 Bolt Carrier Group arrives ready to install, completed with torqued and staked gas key and an O-ring already present on the extractor.
Ar-15 Retro Furniture Sets Brownells.
Recreate an American Classic with the Brownells M16A1 Furniture Kits, built to accurately replicate the original Stock issued to thousands of American servicemen & women.
The included M16A1 style buttstock, handguard and pistol grip are modeled off of original components, designed to bring affordable, original type gear back to market. There is surplus available, but these parts are continuing to dry up and the quality is often quite poor. Excellent condition items are getting quite expensive. With these furniture kits, you can outfit your favorite Retro rifle in the proper stylings of the period.
Available in several different colors including:
- Black - Proper for Model 602, XM16E1, M16A1 & later generation rifles introduced after 1963
- Green - Proper for early Model 601 rifles, the first AR-15 adopted by the US Air Force in 1959
- Brown - Similar to the earliest AR-15 Prototype rifle furniture used in the late 1950s
Retro furniture from Brownells is not an exact copy of original components or their construction. Some areas have been changed due to manufacturing methods or to avoid counterfeit concerns.
Ar-15 Bcmgunfighter Mcmr Handguard M-Lok Free Float Bravo Company.
Free-Float Aluminum Handguard Ready for M-LOK? Accessories
Bravo Company’s BCM MCMR M-LOK® Compatible Modular Rail handguard gives you a full-length topside Picatinny and seven rows of M-LOK® slots to ensure you have vast expanse of room for mounting accessories. Engineered to minimize bulk, the MCMR is essentially Bravo Company’s popular KMR handguard adapted for the M-LOK® accessory mounting system originally developed by Magpul.
The MCMR M-LOK® Compatible Modular Rail handguard gives you a streamlined, clean-looking rifle that is also easy to grasp and maneuver. The MCMR free-floats your barrel, so the weight of the handguard and attached accessories won’t compromise the gun’s accuracy.
- Engineered for exceptional cross-sectional strength
- Available in a variety of lengths to fit your rifle & suit your needs
- Top Picatinny rail is T-marked
- INCLUDES Proprietary steel barrel nut (same one used on BCM KMR, MCMR and QRF handguards) & installation instructions
The BCM MMR M-LOK ® Compatible Modular Rail handguard is fully dehorned so there are no sharp edges to bite into your hand or snag on your gear. It’s machined from 6061 T6 aluminum for the optimum balance of strength vs. weight, then given a hardcoat anodized finish for extra surface strength and corrosion resistance (yes, aluminum will corrode - look at an older car with factory alloy wheels!).
Big Book Catalog, Issue:71, Page:053