If you seeking special discount you will need to searching when special time come or holidays. Typing your keyword for example Ar-15/m16 Ms3 Multi-Mission Sling Magpul   Ar-15/m16 Ms3 Multi-Mission Sling Magpul Reviews : If you're looking for Ar-15/m16 Ms3 Multi-Mission Sling Magpul. Get Cheap Ar-15/m16 Ms3 Multi-Mission Sling Magpul for Best deal Now!! Join now. check price Ar-15/m16 Ms3 Multi-Mission Sling Magpul looking for special discount 

 

 

Content:

Ar-15/m16 Ms3 Multi-Mission Sling Magpul.

$47.45 - $55.05
Versatile tactical sling switches instantly from traditional two-point configuration for hands-free carry to single-point setup for quick transitions in fast-changing tactical environments. ...

Product Description

For Split-Second, Cross-Shoulder Transitions In Rapidly Changing Tactical Environments

Versatile tactical sling switches instantly from traditional two-point configuration for hands-free carry to single-point setup for quick transitions in fast-changing tactical environments. Use with the Magpul ASAP™ rear adapter plate (sold separately) for 180° of unrestricted sling movement that lets you change shoulders to take full advantage of cover, address targets around corners or other barriers, and shift weapon position if one arm is injured. Built from ultra-thin, exceptionally strong nylon webbing, double stitched at stress points for added strength. MS3 QD sling replaces one Paraclip with a steel QD sling swivel that is compatible with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. Compatible with Magpul RSA® and MSA™, and most loop-style sling adapters.


AR-15, Issue:11, Page:070
Big Book Catalog, Issue:71, Page:251
Sinclair, Issue:5B, Page:219

SPECS:  Nylon webbing, Black, Gray, Ranger Green or Coyote. Hardened steel and reinforced molded polymer hardware. Adjusts from 33" (84cm) to 54" (137cm) long x 1.25" (3.2cm) wide.

J-B® Non-Embedding Bore Cleaning Compound Brownells.

$4.99 - $132.99
The original, time-proven formula developed by Jim Brobst and produced under exclusive license. J-B has been getting burned-on, caked-in powder residue and ...

Product Description

Cuts Through Toughest Bullet Jacket & Powder Fouling - Can't-Run Paste Formulation - Cushioned Abrasive Action Leaves Bores Sparkling - Won't "Eat" Stock Finishes

The original, time-proven formula developed by Jim Brobst and produced under exclusive license. J-B has been getting burned-on, caked-in powder residue and copper jacket fouling out of gun barrels since the 1960’s, and hasn’t damaged an inch of rifling yet. Today, J-B once again proves itself a champion by the way it easily cleans the dirtiest, moly-fouled barrels.

A unique combination of ingredients and a one-of-kind, multi-step mixing process give J-B its special characteristics. They work together to cushion the abrasive action; the soft paste liquifies as you use it, then wipes out of the bore easily. The non-embedding feature means there’s no abrasive residue left behind which might keep "cutting" after you’ve finished cleaning.

J-B has been a favorite on gunsmiths’ benches for years, as a "magic" cure for customer guns that "...just won’t shoot anymore". These pros know that a good scrubbing with J-B often restores accuracy. Match and varmint shooters put a lot of rounds down range, many of those using moly coated bullets. The large amounts of copper fouling and the burned-in moly can create a cleaning nightmare; J-B makes short work of it. Use J-B with the Lewis Lead Remover to get the last speck of leading out of pistol bores. Shotguns combine lead, powder and plastic fouling to really throw patterns off; J-B cleans it all out quickly and easily.

Here’s what a couple of the most respected names in the shooting industry have said about J-B. Jim Carmichel, gun writer and dedicated shooter, "I have used J-B for years and routinely use it even on my very finest benchrest rifles. When no other bore cleaner will get the job done, J-B will." The late Warren Page, a benchrest shooting legend, wrote the praises of J-B when it was first introduced to the shooting public. He said, " J-B is an ultra mild, abrasive oil paste, finer than jewelers’ rouge, which we in the rifle accuracy shenanigan, a few years ago, found was the answer to problems of metal fouling and serious powder fouling that solvents either won’t touch, or will cut only by much labor." And, "... it was quickly discovered that such an extremely fine abrasive, used with discretion, would take out caked powder residue and mild metal streaking without ruining the bore."


1911, Issue:04, Page:059
AR-15, Issue:04, Page:073
Big Book Catalog, Issue:71, Page:348
Sinclair, Issue:5B, Page:149

SPECS: 2 oz. (57 g) net contents jar. or ¼ oz. (7 g) net contents jar. Carton contains 12, 2 oz. jars.

M203 37mm Launcher Lewis Machine & Tool.

$1,599.00
Here’s a truly unique ultra-cool way to cap off that retro rifle build or give any contemporary AR-15 a truly badass upgrade ...

Product Description

Detail-Accurate Reproduction of GI-Issued Component - Available To Everyone

Here’s a truly unique ultra-cool way to cap off that retro rifle build or give any contemporary AR-15 a truly badass upgrade – the M203 37mm Launcher from LMT! An exact replica of the 40mm grenade launchers used by the U.S. Army since 1969, LMT’s M203 launches 37mm flare, smoke, or rubber ball rounds, making it completely legal for civilians to own, with NO FFL required. (The smaller caliber completely prevents the loading of military 40mm ordnance in this launcher.) Aside from adding an extra level of authenticity to a Retro Rifle, the LMT M203 37mm launcher can also be an excellent training tool for law enforcement and security personnel.

This 37mm M203 installs and operates just like its 40mm USGI big brother. Simply release the top locking lever, slide the tube forward, drop in the round, snap the tube back, and you’re ready to light up the night or lay down a smoke screen. LMT’s M203 attaches to either a standard M16A2 rifle barrels with a .625” front O.D. or an M4 carbine barrel with the grenade launcher cutout in front of the gas block, with a GI-type barrel nut at the rear.

  • Shoot 37mm flares or similar rounds ONLY
  • Fits AR-15 with M4 carbine OR 20" M16A2 rifle barrel contour
  • 7075 aluminum, mil-spec hard-anodized finish, matte black
  • Smooth-bore barrel WILL NOT accept military 40mm rounds
  • 15" OAL
  • 12" barrel
  • 3 lbs. total wt.
  • Mounting kits sold separately, see below...

LMT offers two mounting kits for the M203 37mm Launcher: a military-style kit that precisely replicates the original M204 military mount, including the replacement handguard (carbine and rifle models available) and a Quick-Detach mount that lets you easily remove the M203 from your rifle when you need it for other purposes (just as easy to reattach the launcher). Somebody go get "The Roach"...

 

Oem Mid-Length 16 Rifle Aero Precision.

$520.99
This fully-assembled, nearly-complete, Brownells-exclusive rifle from Aero Precision is constructed using second-to-none components to ensure the highest level of accuracy and reliability, ...

Product Description

High-End, Nearly Complete AR Includes Everything You Need - Nothing You Don't

This fully-assembled, nearly-complete, Brownells-exclusive rifle from Aero Precision is constructed using second-to-none components to ensure the highest level of accuracy and reliability, while leaving off the handguard and buttstock – saving you money to buy the accessories you want!

Build your Dream AR-15 from this high quality custom rifle platform without wasting money on components you don't want. Simply choose the free-float handguard that fits your needs, sights, and a mil-spec buttstock, snap them on and head to the range.

Shop mil-spec barrel nut compatible free-float handguards

M4 Aero Precision Upper Receiver

  • Mid-Length Gas & Barrel System Ideal for free-float handguards 
  • 16” 5.56 NATO, 1:7 Twist Barrel with M4 feed ramps 
  • Barrel is machined from 4150 Chrome Moly Vanadium steel to a Government, mid-length profile, then treated with a QPQ corrosion-resistant finish 
  • ½-28 barrel thread pitch includes an installed A2 flash hider 
  • M16 Bolt/Carrier Group features 8620 steel carrier with phosphate finish & chrome lining, and has a properly-staked Gas Key 
  • Bolt machined from Carpenter 158 – High Pressure Tested & Magnetic Particle Inspected

Aero Precision Gen 2 Lower Receiver 

* While supplies last. Prices and availability subject to change without notice. FFL transfer fees may apply. All federal, state, and local laws and ordinances apply. Not available for sale online to CA, CT, DC, MA, NY & NJ. If you live in a restricted area but have proper authorization to purchase please call us at 800-741-0015 and ask for customer service. Rifle comes fully assembled (without handguard and buttstock). 

SPECS: Receivers – Forged 7075 T6 Aluminum Receivers.  Gen2 Lower Receiver includes flared magazine well and upper tension screw to remove upper/lower play.  Finish – Matte black hard anodized.

Bolt Carrier Group – Carpenter 158 Bolt, 8620 Carrier and mil-spec components.  Bolt is High Pressure Tested, Magnetic Particle Inspected and shot-peened.  Finish – Phosphate with chrome lined carrier & gas key.

Barrel – Chambered in 5.56x45mm NATO.  1-7 Twist.  Profile – Government.  Gas System – Mid-length with installed gas block and tube.  Threads – ½-28.  Finish is QPQ nitride. 

Receiver Extension – Mil-Spec diameter buffer tube assembly with carbine buffer.

Pf940cv1 80% Frame Aggressive Texture For Glock® 19/23/32 Od Grn Polymer80.

$143.99
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular ...

Product Description

The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.  

The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling - the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.

  • Compatible with Gen3 Glock® Components. Not Compatible with Gen4
  • Improved next generation ergonomics make for a great shooting pistol
  • High strength reinforced polymer construction provides a great basis for a reliable & durable gun
  • Aggressive texture on the PF940Cv1 ensures positive retention
  • Picatinny rail is compatible with all standard lights, lasers & accessories
  • Stainless steel locking block ensures positive operation & a lifetime of use
  • Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse
  • Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid
  • Includes complete finishing jig
  • Jig includes drill bits and end mill, allowing for complete construction

The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.

The PF940Cv1 is compatible with Glock® 19/23/32 frame components.

Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Big Book Catalog, Issue:71, Page:216

Remington 700 Special Triggers Triggertech.

$184.99 - $194.99
The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any right-handed Remington ...

Product Description

The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any right-handed Remington 700 model rifle. Utilizing CLKR Technology™, and some additional hand refinements, the pull weight on the Special model is quickly and confidently adjusted from 1.0 - 3.5 lbs in ~1oz increments from an externally accessible set screw. Due to the exceptionally crisp break, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured weight. Just like the Primary model, this drop-in trigger provides a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots than you ever thought possible.

All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***

All Purpose Cleaning Brushes Otis.

$3.99 - $8.99
Nylon, bronze or stainless steel bristles means you will always have the correct brush on hand even for the toughest cleaning requirement. Flexible, ...

Product Description

Have The Right Brush On Hand For The Toughest Cleaning Job

Nylon, bronze or stainless steel bristles means you will always have the correct brush on hand even for the toughest cleaning requirement. Flexible, double-ended design is best around in the shop; can be put to dozens of uses cleaning, polishing and restoring. Blue or white nylon takes care of fresh carbon or powder residue inside or out but won’t scratch your firearm’s finish. Extra-gentle white nylon is also perfect for cleaning delicate wood surfaces. Bronze cleans more stubborn residue on metal surfaces that require more aggressive scrubbing action like inside slides, receivers or locking lugs. Stainless steel is best for aggressive cleaning of fouling other brushes won’t touch. Use stainless steel on interior surfaces only because it will scratch and mark most gun steels and finishes.


AR-15, Issue:04, Page:072
Big Book Catalog, Issue:71, Page:341
Sinclair, Issue:4X, Page:002

SPECS: Polymer handle, 7” (17.8 cm) long. Single row bristles on small end, triple row bristles on large end. Variety Pak contains one (1) each stainless steel, bronze, and white nylon brush.