Discount 1500 308 18.5" Threaded Standard Barreled Action Howa You can order 1500 308 18.5" Threaded Standard Barreled Action Howa after check, compare the costs and check day for shipping. Some people are want to buy 1500 308 18.5" Threaded Standard Barreled Action Howa with the cheap price. While the item might be priced similarly at different shops.
1500 308 18.5 Threaded Standard Barreled Action Howa.
Dead-On Accuracy Out of the Box & Unlimited Customizing Options
The Howa 1500 18.5" .308 Winchester Barreled Action lets you build your own high-end precision rifle – without getting a second mortgage to pay for it. Built around a short-action (SA) receiver and a high-quality cold hammer-forged barrel, the Howa 1500 .308 Winchester Standard Barreled Action locks up tight with Howa’s one-piece, dual-lug bolt machined for an extremely precise fit to the receiver raceway.
Also inside, Howa’s Actuator Controlled Trigger (HACT) delivers a crisp, light, consistent pull, adjustable between 2.5 and 3.8 lbs. Rounding out the package is a three-position safety, is often preferred by bolt-action shooters.
The rest is up to you: customize your rifle exactly the way you want by installing the remaining components yourself. Howa takes care of the most difficult task, mating barrel to action and getting correct headspacing. You install the barreled action into the stock or chassis system of your choice and add accessories. The Scout Model accepts a front sight.
- 18-1/2" barrel length for a compact, maneuverable field rifle
- 5/8"-24 tpi threaded muzzle is ready for a comp/brake/flash suppressor (thread cap included)
- Blued finish
- M16-type extractor for reliable cartridge extraction
- FFL required for purchase
All that’s needed to complete your Howa 1500 .308 Standard Barreled Action is a stock, scope, bottom metal of choice, and mounting hardware. Then hit the range and see what your new custom rifle can do!
Big Book Catalog, Issue:71, Page:160
Gen 5magazine For Glock®17/34 Glock.
The Latest Gen5 Upgrades - Compatible With Earlier Models
These are genuine factory replacement magazines for Gen5 Glock® 17 / 34 pistols. Built around a tough, crack resistant, molded polymer body, Gen5 mags have a steel lining for extra strength and durability. Inside, an orange follower makes keeping track of load status through the witness holes easier, while the extended, angled baseplate helps with those fast magazine changes.
- Available with standard 17- or 10-rd capacity
- High-visibility orange follower
- Witness holes on rear face
Glock® 17 / 34 Gen5 magazines are contoured at the base to match the flared magwell of Gen5 pistols, yet are still fully compatible with all earlier generation Glock® pistols.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
100% Cotton Flannel Bulk Pak Round Cleaning Patches Brownells.
Super Absorbent In Hard-To-Find Shape
Save money and get guns cleaner. These round patches are made of 100% cotton flannel, fleeced on both sides to be extra absor- bent, and bulk packed in 1000’s. All natural fibers carry far more solvent or oil into a bore than any synthetic patch can. Soak up and carry far more crud and fouling out! Big Price savings from buying in bulk, gives lots more patches for the buck. Hundreds of other uses, too.
Big Book Catalog, Issue:71, Page:339
SPECS: Sold per 1000 in bulk pak.
Steel Neck Bushings Redding.
Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size.
View other sizes:
Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.
If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.
Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.
Sinclair, Issue:1B, Page:043
Hd Xr Night Sights For Glock Trijicon.
Next Level of Advanced Target Identification and Long-Distance Engagement
HD XR Night Sights for Glock handguns from Trijicon offer the next level of advanced target identification and long-distance engagements. While some sights obscure the target, or make confirmation of hits on target hard to see, the thinner front sight post reduces these common issues.
HD XR Night Sights use a U-notch rear sight design for intuitive use and quick target acquisition.
- Sapphire jewel capped tritium lamps
- Tritium-phosphor lamp
- Silicone rubber cushion
These XD HR Night Sights are compatible with Glock handguns.
Big Book Catalog, Issue:71, Page:322
Gamma 65 Muzzle Brake 6.5 Creedmoor Vg6 Precision.
Designed to Deliver Optimal Performance
The VG6 Gamma 65 is a muzzle brake and compensator hybrid. Designed with precision techniques to eliminate recoil and dramatically lessen movement, it has been machined for the user with optimal performance in mind.
The VG6 Gamma 65 features both breaking and compensating to inspire confidence and allow faster follow up shots.
- 17-4ph heat treated stainless steel with black nitride or bead blasted stainless steel finish
- 5/8-24 RH TPI
- Includes crush washer
- 2.4 oz weight
- For use with the 6.5 Creedmoor, 6.5 Grendel, and 6.8 Remington SPC platform
If looking for a hybrid brake /compensator for your next build, or to update your existing rifle, the VG6 Gamma 65 should be a consideration.
Big Book Catalog, Issue:71, Page:022
Ar-15/m16 B.a.d. Lever™ Magpul.
Lets You Release The Bolt With The Trigger Finger; Improves Readiness & Efficiency
The Magpul Battery Assist Device (B.A.D.) is an extended bolt release that allows the shooter to keep his hand in the ready position on the pistol grip and operate the bolt catch with the trigger finger. Streamlines bolt catch manipulation to get the weapon into battery more quickly for improved operator readiness and weapon handling efficiency. Easy to install and remove—no weapon disassembly required. The B.A.D. lever clamps securely to the factory bolt release with a Torx® head screw and extends a paddle through the front of the triggerguard to the right-hand side of the weapon. Trigger finger can stay outside the triggerguard as you operate the lever, and factory bolt catch retains normal function with B.A.D. installed. Made of a high-grade aluminum alloy, hardcoat anodized to MIL-A-8625F, Type III, Class 2 spec for extra strength and wear resistance.
AR-15, Issue:11, Page:035
Big Book Catalog, Issue:71, Page:038
Sinclair, Issue:5B, Page:250
SPECS: Aluminum, hardcoat anodized, matte black. Torx wrench and installation instructions included. Fits mil-spec AR-15/M16 receiver with factory bolt release lever.