Buy at this store.See Detail Online And Read Customers Reviews Berger Hunting Bullets Berger Bullets prices throughout the online source See individuals who buy "Berger Hunting Bullets Berger Bullets" Make sure the shop keep your personal information private before you purchase Berger Hunting Bullets Berger Bullets Make sure you can proceed credit card online to buyBerger Hunting Bullets Berger Bullets together with store protects your information from fraudulents Make sure the customer support is definitely there to aid you when you place Berger Hunting Bullets Berger Bullets order with them
Berger Hunting Bullets Berger Bullets.
The Berger Hunting bullet line is proving to be the most lethal big game hunting bullets available. All of the Berger Hunting bullets are made in the VLD design. The VLD design incorporates a sharp nose that allows the bullet to penetrate 2” to 3” before it starts to expand. After the bullet starts to expand it will shed 40% to 85% of its weight as shrapnel into the surrounding tissue (internal organ). The combination between the shrapnel and the hydrostatic shock produces a massive wound cavity within the vital area (internal organs) that will be 13” to 15” long. This massive wound cavity results in the animal dropping fast since most go into shock after such a tremendous blow. Those animals that don’t go down immediately will soon succumb to blood pressure loss and/or organ failure producing a quick ethical kill. Berger bullets don't poke through like an arrow (high weight retention, deep penetration bullets) but instead dump their energy where it is most effective, inside the animal. Using the Berger VLD will result in an animal that goes down fast so you can enjoy the results of your hunt without having to track the wounded animal after the shot.
Big Book Catalog, Issue:68, Page:541
Sinclair, Issue:5B, Page:103
Ar-15/m16 Barrel Extension Torque Tools Brownells.
Aids Fast, Easy Barrel Installation; Protects Barrel Nut & Receiver From Damage
Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the AR-15/M16.
AR-15, Issue:11, Page:084
Big Book Catalog, Issue:71, Page:087
SPECS: Machined steel, black oxide finish. 9” (22.9cm) long, 1” (2.5cm) diameter. Fits barrel extensions of AR-15/M16/M4 and clones chambered in .223/5.56mm only. Requires a ½” square drive torque wrench. Instructions included.
Suppressor Tritium Night Sights For Glock® Trijicon.
Trijicon has introduced a line of taller Bright & Tough Night Sights designed specifically for Glock handguns fitted with suppressors and to serve as co-witness iron sights for the growing number of shooters utilizing the Trijicon RMR with machined slides. The new offerings are available in multiple front / rear configurations for a variety of applications. Trijicon self-luminous Night Sights increase night-fire shooting accuracy by as much as five times over conventional sights. Equally impressive, they do so with the same speed as instinctive shooting– and without the need for batteries.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:322
SPECS: Fits Glock models; 17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, and 39.
Rmr Type 2 Rm06 3.25 Moa Adjustable Led Reflex Sight Trijicon.
Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon RMR (Ruggedized Miniature Reflex) Type 2 is designed to be as durable as the legendary ACOG. The RM06 is an LED sight powered by a standard CR2032 battery. Housed in rugged forged aluminum, the RMR is extremely tough yet lightweight. New easy-to-use adjusters with audible clicks allow for quick windage and elevation adjustments.
With eight available brightness settings, the reticle can be manually adjusted by pressing the plus or minus buttons on either side of the unit. To switch to auto adjust mode simply press both buttons simultaneously and release. To save battery life turn the optic off by pressing both buttons simultaneously and holding for 3 seconds.
The Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications.
Available in Anodized Black or Cerakote finishes in Sniper Gray, OD Green, and Flat Dark Earth.
Big Book Catalog, Issue:71, Page:280
T1 Supertarget Ammo 12 Gauge 2-3/4 1 Oz 8 Shot Clever.
Clever-Mirage first saw the light in 1952 when four shooters and hunting enthusiast friends joined forces. Thanks to their excellent quality these products were instantly appreciated all over Italy. Being a family run business has always been the fundamental characteristic of this "made in Italy" company. All Clever munitions produced are tested under extreme conditions before ever being put into the market.
You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition. All ammunition must be shipped Domestic Ground. Shipping not available for International residents. Residents in CA, DC, DE, IL, MA, NY, CT, NJ and OH may have additional restrictions. Always make sure you use the correct ammunition for your firearms. Check your state and local laws for any other applicable firearms and ammunition regulations. Due to Department of Transportation regulations, we cannot accept returns on ammo. Please check local laws before ordering. View full restrictions here.
Ammunition pricing is per box. ATTENTION – California Customers
Brownells is still shipping ammunition orders to California but the process has changed to comply with California Proposition 63. We must now ship ammunition purchased online to an FFL or California-approved ammunition dealer. After placing your order, a Brownells representative will contact you to ensure your ammunition arrives quickly and in compliance with the law.
Ar-15 9mm Conversion Adapter Stern Defense, Llc.
Easily Convert Your Lower to 9mm
There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. Simply add the Stern Defense AR-15 9mm Conversion Adapter and use either Glock or Smith & Wesson M&P pistol magazines with ease.
The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt.
- Made of aircraft grade aluminum
- Lightweight, ergonomic design
- Installs in seconds
If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Ar-15/m16 Cat Tool Cat Outdoors.
Compact, Multi-Tool Helps Keep Bolt/Carrier Group Functioning Smoothly
Compact, easy to carry pocket tool performs four separate cleaning functions to help you quickly restore the critical bolt/carrier tolerances that can be compromised by carbon buildup after prolonged shooting. Use as a bolt scraper, firing pin cleaner, patch holder for swabbing the bolt recess, and scraper for removing carbon in the carrier. Plus, the center of the tool is equipped with a ¼" hex head recess to use as a driver. Carry a few ¼" driver bits, and you’re all set to make adjustments that keep your rifle tuned and shooting.
AR-15, Issue:11, Page:080
Big Book Catalog, Issue:71, Page:083
SPECS: Machined steel casting. 3½" (8.8cm) long. Includes shirt pocket card/carrier with illustrated instructions. CAT M4 fits AR-15/M16/M4 chambered for 5.56mm NATO/.223 Rem.