Ar-15 Modular Stock Assy Fixed Rifle Length Luth-Ar Llc.
Stocks Add Adjustment & Extra Features To Rifles
Glass-filled nylon rifle stocks fit onto standard A1/A2 buffer tubes and add adjustments and extra features to AR-15 rifles, including most .308 models. Stocks feature textured rubber recoil pads and 2 QD sling sockets for fast sling mounting and dismounting. Modular Stock gives an adjustable cheek rest, and adjustable length of pull. Weighs less compared to other adjustable stocks. Skeleton Stock has futuristic appearance, and helps reduce weight. Will not fit on carbine buffer tubes. Includes Allen wrench for mounting.
Sold Separately: Uncle Mike's QD Sockets can be epoxied into socket on the side of each stock, use part# 593-000-038.
AR-15, Issue:11, Page:043
Big Book Catalog, Issue:71, Page:047
SPECS: Glass-filled nylon, matte black. 10-1/2" long. Modular - Cheek adjusts 1". LOP adjusts 1 1/16". 1 lb. 3 oz. (539g) wt. Skeleton - 11 oz. (314g) wt.
Mark Ii Induction Annealing Machine Amp Annealing.
The Mark II AMP Induction annealing machine adds some advances over the original Mark I. First off, the Mark II annealer now works with cartridges from 17 Hornet to 50 BMG. Additional air intakes and upgraded cooling fans provide improved airflow and better cooling for extended annealing sessions. Possibly the most exciting feature of the Mark II annealer is the additiona of pre-loaded AZTEC mode allowing users complete independence in determining the exact, correct annealing setting, regardless of cartridge, brand neck wall thickness or lot.
- Larger inductor to suit 50 BMG.
- Capable of annealing everything from .17 Hornet to 50 BMG.
- Significantly more output power.
- Ceramic heat shield in the inductor to aid in heat management.
- Superior cooling allowing near indefinite run time on smaller cases such as 223.
- User replaceable pilot boss should the existing one get cross threaded or damaged.
- AZTEC MODE included and ready to use.
Compact Reflex Mini Sight (rmsc) Shield Sights Ltd..
Compact Red Dot Sight for Single Stack Pistols
The Shield Compact RMSc is the slimmed down version of the popular RMS red dot sight. The RMSc (Reflex Mini Sight Compact) is small enough to fit discreetly on any subcompact gun, tough enough to withstand the harshest recoil and light enough that you won’t even feel it’s there.
The matte black RMSc is machined from strong aerospace grade aluminum and weighs 0.61 ounces. It features automatic brightness adjustment to adapt to your environment allowing you to concentrate on the target not your front sight.
- Battery Life: 22000 hours
- Night Vision Compatible: Yes
- Power Supply: CR 2032
- Reticle: 4 MOA Red Dot
Shield designed the RMSc to provide a stunning, low profile design making it an ideal optic for any custom sub compact pistol build that will also fit a 1911 slide with no visible overhang and be low enough that the sight will co-witness without the need for suppressor height sights.
Ar-15 Maritime Bolt Catch Black Geissele Automatics Llc.
Wet Hand? Wearing Gloves? Helps You Release the Bolt on the First Swipe
As its name indicates, Geissele’s Maritime AR-15 Bolt Catch is designed for use in wet operating environments where the AR-15 user needs an oversized, deeply textured button for positive, first-attempt operation of the bolt release. It’s an excellent upgrade for anybody who needs help making solid contact with the release button under stress or when wearing gloves.
With its aggressively checkered thumb pad, the Geissele Maritime AR-15 Bolt Catch also gives you non-slip contact and positive feedback when manipulating it in the dark or while wearing gloves. The Maritime Bolt Catch’s large surface area is a big help in quickly locking the bolt back and releasing it after a mag change.
- Strong - heat treated 8620 steel - won’t fail under hard use
- Black Parkerized (manganese phosphate) finish resists surface wear & corrosion
- Large, deeply textured, two-part contact pad
- Fits any lower receiver that accepts a standard mil-spec AR-15 / M16 / M4 bolt catch
- Bolt catch spring, plunger & roll pin not included - recycle your old parts or purchase separately
With the Geissele Maritime AR-15 Bolt Catch installed, left-handed shooters get a bonus have because they won’t have to break their grip to manipulate the catch thanks. Left-handed shooters can simply use their left index finger to lock the bolt back quickly and efficiently when making magazine changes.
Big Book Catalog, Issue:71, Page:038
1500 308 Win 26 Threaded Semi Heavy Barreled Action Howa.
The Platform for a High-End Rifle Without The High-End Price
With the Howa 1500 Heavy Barreled .308 Winchester Action you can have that precision, long-range rifle of your dreams for a fraction of the cost (and the typical wait time) of having a custom rifle builder make one for you. All you have to do is outfit it with a stock, scope, a few select accessories, and you’re ready to rock-and-roll!
This Howa 1500 takes a heavy-contour, hammer-forged barrel and marries it to a forged steel short action (SA) receiver to form the foundation of your .308 Winchester tack-driver. Inside the receiver, a one-piece, dual-lugged bolt with a squared bolt face maintains optimum contact with the receiver recesses. Outside, an easy-to-reach, three-position safety locks the bolt completely or lets you cycle the bolt to clear the rifle while keeping the safety ON.
The Howa 1500 Heavy Varmint barreled action also gives you the benefit of Howa’s light, two-stage HACT (Howa Actuator Controlled Trigger) trigger. It delivers a smooth, consistent pull and a break that can be set from 2.5 to 3.8 lbs. An M16 style extractor kicks out empty cartridges with alacrity.
- Fully assembled & headspaced
- 1/2-28" threaded muzzle with cap
- Blued finish
- FFL required for purchase
The Howa 1500 Heavy Barreled .308 Winchester Action is a great start for building your own custom rifle – especially when the hard part is already done for you!
Big Book Catalog, Issue:71, Page:160
1911 Lug Fitting Kit Brownells.
Helps You Fit The Standing Lugs On Oversized Barrels
Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case.
1911, Issue:11, Page:055
Big Book Catalog, Issue:71, Page:147
SPECS: Barrel Holder - Steel. Approximately 3.5" (9cm) long .44" (1.1cm) O.D. Barrel Lug Cutter - Carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long.
Pf90v2 80% Frame Readymod For Glock 17/22/33/34/35 Polymer80.
Ergonomics Meets Customization
The PF940v2 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.
The PF940v2 allows Glock® 17, 22, 33, 34, & 35 owners to create a customized handgun, exactly suited for any application. Available in the standard PF940v2 with aggressively textured grips or the PF940v2-ReadyMod with blank grips for custom stippling—the customization possibilities are endless.
- Improved next generation ergonomics make for a great shooting pistol
- High strength reinforced polymer construction provides a great basis for a reliable & durable gun
- Aggressive texture on the PF940v2 ensures positive retention
- ReadyMod version allows user to completely stipple and customize frame
- Picatinny rail is compatible with all standard lights, lasers & accessories
- Stainless steel locking block ensures positive operation & a lifetime of use
- Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse
- Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid
- Includes complete finishing jig
- Jig includes drill bits and end mill, allowing for complete construction
The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.
The PF940v2 is compatible with Glock® 17/22/33/34/35 frame components.
Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.
Big Book Catalog, Issue:71, Page:216