Shop for cheap price 1500 308 Win 26" Threaded Semi Heavy Barreled Action Howa .Price Low and Options of 1500 308 Win 26" Threaded Semi Heavy Barreled Action Howa from variety stores in usa. products sale.

"Today, if you do not want to disappoint, Check price before the Price Up.1500 308 Win 26" Threaded Semi Heavy Barreled Action Howa You will not regret if check price." 1500 308 Win 26" Threaded Semi Heavy Barreled Action Howa compare prices

Content:

1500 308 Win 26 Threaded Semi Heavy Barreled Action Howa.

$450.99
With the Howa 1500 Heavy Barreled .308 Winchester Action you can have that precision, long-range rifle of your dreams for a fraction ...

Product Description

The Platform for a High-End Rifle Without The High-End Price

With the Howa 1500 Heavy Barreled .308 Winchester Action you can have that precision, long-range rifle of your dreams for a fraction of the cost (and the typical wait time) of having a custom rifle builder make one for you. All you have to do is outfit it with a stock, scope, a few select accessories, and you’re ready to rock-and-roll!

This Howa 1500 takes a heavy-contour, hammer-forged barrel and marries it to a forged steel short action (SA) receiver to form the foundation of your .308 Winchester tack-driver. Inside the receiver, a one-piece, dual-lugged bolt with a squared bolt face maintains optimum contact with the receiver recesses. Outside, an easy-to-reach, three-position safety locks the bolt completely or lets you cycle the bolt to clear the rifle while keeping the safety ON.

The Howa 1500 Heavy Varmint barreled action also gives you the benefit of Howa’s light, two-stage HACT (Howa Actuator Controlled Trigger) trigger. It delivers a smooth, consistent pull and a break that can be set from 2.5 to 3.8 lbs. An M16 style extractor kicks out empty cartridges with alacrity.

  • Fully assembled & headspaced
  • 1/2-28" threaded muzzle with cap
  • Blued finish
  • FFL required for purchase

The Howa 1500 Heavy Barreled .308 Winchester Action is a great start for building your own custom rifle – especially when the hard part is already done for you!
 


Big Book Catalog, Issue:71, Page:160

1911 Lug Fitting Kit Brownells.

$20.99 - $179.99
Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let ...

Product Description

Helps You Fit The Standing Lugs On Oversized Barrels

American Pistolsmiths Guild Seal of ApprovalThree essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case.


1911, Issue:11, Page:055
Big Book Catalog, Issue:71, Page:147

SPECS: Barrel Holder - Steel. Approximately 3.5" (9cm) long .44" (1.1cm) O.D. Barrel Lug Cutter - Carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long.

Pf90v2 80% Frame Readymod For Glock 17/22/33/34/35 Polymer80.

$149.99
The PF940v2 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular ...

Product Description

Ergonomics Meets Customization

The PF940v2 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.

The PF940v2 allows Glock® 17, 22, 33, 34, & 35 owners to create a customized handgun, exactly suited for any application. Available in the standard PF940v2 with aggressively textured grips or the PF940v2-ReadyMod with blank grips for custom stippling—the customization possibilities are endless. 

  • Improved next generation ergonomics make for a great shooting pistol 
  • High strength reinforced polymer construction provides a great basis for a reliable & durable gun
  • Aggressive texture on the PF940v2 ensures positive retention
  • ReadyMod version allows user to completely stipple and customize frame 
  • Picatinny rail is compatible with all standard lights, lasers & accessories
  • Stainless steel locking block ensures positive operation & a lifetime of use
  • Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse 
  • Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid 
  • Includes complete finishing jig 
  • Jig includes drill bits and end mill, allowing for complete construction

The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.


The PF940v2 is compatible with Glock® 17/22/33/34/35 frame components.

Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.


Big Book Catalog, Issue:71, Page:216

Pf940cv1 80% Readymod Frame Glock® 19/23/32 9mm/40s&w Polymer80.

$149.99
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular ...

Product Description

The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.  

The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. PF940Cv1-ReadyMod with blank grips for custom stippling—the customization possibilities are endless.

  • Compatible with Gen3 Glock® Components. Not Compatible with Gen4
  • Improved next generation ergonomics make for a great shooting pistol
  • High strength reinforced polymer construction provides a great basis for a reliable & durable gun
  • Aggressive texture on the PF940Cv1 ensures positive retention
  • ReadyMod version allows user to completely stipple and customize frame
  • Picatinny rail is compatible with all standard lights, lasers & accessories
  • Stainless steel locking block ensures positive operation & a lifetime of use
  • Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse
  • Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid
  • Includes complete finishing jig
  • Jig includes drill bits and end mill, allowing for complete construction

The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.

The PF940Cv1 is compatible with Glock® 19/23/32 frame components.

Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Big Book Catalog, Issue:71, Page:216

Brn-22 Barreled Receiver For Ruger™ 10/22™ Brownells.

$149.99 - $159.99
With our BRN-22™ Barreled Receivers, Brownells includes the other major component, the barrel. You get our target-rifle quality BRN-22™ receiver with the ...

Product Description

Barrel Included - The Customizing Is Up To You

With our BRN-22™ Barreled Receivers, Brownells includes the other major component, the barrel. You get our target-rifle quality BRN-22™ receiver with the barrel included, so adding the remaining components - your choice of trigger, stock, sights/optic, and muzzle device - is up to you.

Barrels are available in Sporter and Heavy profile, both in 16"length, while the Heavy barrel is also available in a short, 10" length for pistol or SBR builds. All barrels come with ½"-28 tpi muzzle threads for the installation of a compensator, flash suppressor, or silencer.

The BRN-22™ receiver itself is precision-machined from billet 6061 aluminum and is fully compatible with components that fit the Ruger® 10/22® platform. Receivers are available with the Standard factory 10/22® top profile, right down to the drilled-and-tapped scope mounting holes, or a Railed model with an integral Picatinny top rail to maximize your scope-mounting. (For a full description of the BRN-22 receiver’s features, see the separate listing for the stripped receivers.)

  • Receiver machined from 6061 T6 aluminum billet
  • Barrel is NOT installed
  • Durable matte black hardcoat anodized receiver finish
  • 1/2"-28 tpi muzzle threads accept popular muzzle devices
  • Matte black oxide finish on barrels
  • Compatible with all components that fit a factory Ruger® 10/22®
  • Also available as a bare stripped receiver - Click here to see separate listing
  • FFL or delivery to an FFL holder required for purchase

A pre-cut hole at the rear of each receiver allows easy insertion of a cleaning rod to clean the bore from the chamber, the RIGHT way, to prevent accuracy-compromising cleaning rod damage to the muzzle.


The BRN-22™ barreled receiver is ready to serve as the foundation of a precision rimfire rifle Dream Gun™. Get your imagination fired up and see what you can build!

Due to varying dimensions in aftermarket and some older factory aluminum trigger housings, fitting may be required.


Big Book Catalog, Issue:71, Page:158

Pf940cv1 80% Frame Aggressive Texture For Glock® 19/23/32 Grey Polymer80.

$149.99
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular ...

Product Description

The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.  

The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling - the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.

  • Compatible with Gen3 Glock® Components. Not Compatible with Gen4
  • Improved next generation ergonomics make for a great shooting pistol
  • High strength reinforced polymer construction provides a great basis for a reliable & durable gun
  • Aggressive texture on the PF940Cv1 ensures positive retention
  • Picatinny rail is compatible with all standard lights, lasers & accessories
  • Stainless steel locking block ensures positive operation & a lifetime of use
  • Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse
  • Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid
  • Includes complete finishing jig
  • Jig includes drill bits and end mill, allowing for complete construction

The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.

The PF940Cv1 is compatible with Glock® 19/23/32 frame components.

Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Big Book Catalog, Issue:71, Page:216

Model 19 9mm Magazine 3 Pack Glock.

$74.99
Be confident your Glock® pistol will perform to factory standards each and every time with genuine Glock® factory magazines. Manufactured to Glock® ...

Product Description

Be confident your Glock® pistol will perform to factory standards each and every time with genuine Glock® factory magazines. Manufactured to Glock® specifications in Austria by Glock®. All models include round count indicator on rear face of magazine body and standard factory baseplate.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.