Ar-15 Stock Assembly Collapsible Carbine Length Luth-Ar Llc.
Enhance the Fit and Function of Your Favorite Rifle
This fully adjustable buttstock assembly by Luth-AR is a perfect upgrade for your favorite rifle or your latest build. Featuring adjustment options for length of pull, as well as vertical and lateral adjustment of the butt plate, you can create a fit that is truly your own.
The Luth-AR adjustable buttstock assembly also features a bottom picatinny rail for additional accessories and a set screw which enables you to lock your stock in your favorite position, while at the same time eliminating any possible rattle.
- Will fit commercial and mil-spec buffer tubes
- Works with all .223/5.56 and most .308 AR type rifles
- Comes with a black medium soft butt plate
- NOT interchangeable with A2 standard buffer tube
The Luth-AR adjustable buttstock is constructed of durable lightweight polymer and available in black or FDE.
Big Book Catalog, Issue:71, Page:047
Fusion Ammo 223 Remington 62gr Bonded Bt Federal.
Explosive Energy Ammunition For Field Or Range
- 20 cartridges per box
- Fusion bullet
- Full line of calibers from 223 to 338 available
Federal Fusion Rifle ammunition bullets are electrochemically joined pure copper to an extreme pressure formed core, ensuring optimum performance down range. The result of this is high terminal energy on impact with radiated shock throughout the target.
You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition. All ammunition must be shipped Domestic Ground. Shipping not available for International residents. Residents in CA, DC, DE, IL, MA, NY, CT, NJ and OH may have additional restrictions. Always make sure you use the correct ammunition for your firearms. Check your state and local laws for any other applicable firearms and ammunition regulations. Due to Department of Transportation regulations, we cannot accept returns on ammo. Please check local laws before ordering. View full restrictions here.
Ammunition pricing is per box. ATTENTION – California Customers
Brownells is still shipping ammunition orders to California but the process has changed to comply with California Proposition 63. We must now ship ammunition purchased online to an FFL or California-approved ammunition dealer. After placing your order, a Brownells representative will contact you to ensure your ammunition arrives quickly and in compliance with the law.
AR-15, Issue:08, Page:095
Big Book Catalog, Issue:66, Page:524
Ar-15 Upper Receiver Assembled No Auto Sear Cut Aero Precision.
Designed for Single-Shot Use
If you're looking to take advantage of the huge market for AR-15 components and accessories but aren't legally allowed to possess components that function with an installed auto sear in the AR-15 lower, then the Aero Precision AR-15 Upper Receiver with No Auto Sear Cut is the perfect product for you.
Designed particularly for use by European gun owners, the Aero Precision AR-15 Upper Receiver with No Auto Sear Cut matches every other specification of a standard AR-15 upper receiver, including an ejection-port cover and a forward assist.
- Chambered in 5.56 NATO
- Features M4-style feedramps
- Machined with .250-inch takedown pin holes
- Ships completely assembled
The Aero Precision AR-15 Upper Receiver with No Auto Sear Cut is forged from 7075-T6 aluminum and can be had in black or flat dark earth finishes.
Drop-In Trigger For Glock® Red Agency Arms Llc.
Smooth, Consistent Pull & Short, Crisp Reset - RED Finish Available ONLY from Brownells
Installing a Red Flat-Faced Trigger Kit from Agency Arms is the quickest, easiest way to make a major upgrade to the performance of your Glock. By a special arrangement with the folks at Agency, Brownells is the ONLY place where you want get this special edition of the flat-faced trigger with an eye-catching, red anodized finish on the trigger shoe.
The Red Flat-Face Trigger is a drop-in upgrade - meaning you can do it yourself in a few minutes - that gives your Glock a noticeably smoother trigger pull with minimal pre-travel and a short, snappy, positive reset. A high-polish trigger bar and a Glock factory "minus" trigger connector work together to produce a consistent, even, 3.5 lb. pull that’s light enough to promote better accuracy yet safe enough for use on duty/carry pistols.
- Easy, fast drop-in installation
- Function of critical factory safety lever in trigger face is fully maintained
- Sturdy all-aluminum trigger shoe has excellent, stable feel
- Flat face gives the shooter excellent control through entire pull arc
- Distinct tactile & audible signal when trigger is reset
- Separate models for Gen1-4 standard frame pistols, new Gen5 pistols, and the G43
Many precision shooters prefer the flat-faced trigger shoe since it reduces the contact area between the finger and trigger. This gives you better control throughout the pull and lets you control perceived pull weight by positioning your finger higher or lower on the shoe for the precise amount of leverage. A "toe" at the bottom of the shoe serves as an indexing point so you won’t put your finger TOO far down.
The Red Flat-Face Trigger Kit for Glock is available in 3 configurations: Gen1-4 fits Generation 1 through 4 standard frame pistols chambered in 9mm, .357 SIG and .40 S&W. There's a separate model just for the G43, which is fitted with a Ghost, Inc., connector, and the Gen5 model fits ONLY the recent Gen5 G17, 19, 19X, 26 and 34 pistols.
Xps2 Holographic Weapon Sight Eotech.
The EOTech XPS2 Holographic Weapon Sight is the shortest and lightest HWS sight yet. With a single 123 lithium battery configuration, the XPS provides additional rail space, leaving more room for rear iron sights, magnifiers or Night-Vision mount. Also offering waterproof capability up to 10ft, the XPS2 is a great compact option for your platform. Mounts to a Weaver or MIL-STD-1913 Rail. Utilizes a single 123 lithium battery with a continuous runtime of 600 hours on a brightness setting of 12.
AR-15, Issue:11, Page:098
Big Book Catalog, Issue:71, Page:278
M16 Mil-Spec Mp/hpt Bolt Carrier Group Brownells.
Complete M16 Bolt Carrier Group:
- Fully assembled Bolt Carrier Group; including the bolt, bolt carrier, gas key, firing pin, cam pin, and firing pin retaining pin
- Every Bolt is High Pressure Tested (HPT) with a proof load
- Following the High Pressure Test, every Bolt is Magnetic Particle Inspected (MPI)
- Not stamped with HPT or MPI
- The Bolt is machined from Carpenter 158 steel
- Following machining, the Bolt is heat treated and shot peened
- Installed extractor includes red o-ring with spring
- M16 Bolt Carrier is machined from 8620 steel and hardened
- Interior of Bolt Carrier Carrier Key & Bolt Carrier are chrome lined
- M16 Bolt Carrier will function in semi-auto or full-auto AR-15/M16
- Gas Key Screws are properly torqued and staked
- Bolt and Bolt Carrier feature a matte black mil-spec finish
AR-15, Issue:11, Page:011
Big Book Catalog, Issue:71, Page:011
Sinclair, Issue:5B, Page:248
SPECS: Bolt – Carpenter 158 steel, Magnetic Particle Inspected, High Pressure Tested. Carrier – 8620 hardened steel, M16. Matte black phosphate finish.
Rem 700 Bravo S/a Chassis Kinetic Research Group.
Take Your Remington 700 Up a Notch
The Remington 700 is one of the most customized rifles on the market, and finding the perfect aftermarket component can be a never-ending search. However, the stock is covered, thanks to the Kinetic Research Group Remington 700 Bravo Chassis.
The Kinetic Research Group Remington 700 Bravo Chassis features a backbone made from machined aluminum that stretches along the entire length of the stock, giving it rigidity that will ensure the same performance usually found with custom bedding jobs. The rest of the stock is made from reinforced polymer for durability.
- Fits all Remington 700 short actions
- Available in black and flat dark earth colors
- Weight: 2.9 pounds
- M-LOK compatible
The Kinetic Research Group Remington 700 Bravo Chassis also features an adjustable cheek riser and length of pull, a built-in thumb shelf, quick-detach sling-swivel mounting points, bipod-attachment stud and is compatible with all AICS-pattern magazines.
Big Book Catalog, Issue:71, Page:191