"Today, if you do not want to disappoint, Check price before the Price Up.Bodyguard 38 Crimson Trace 1.9in 38 Special Matte Black 5rd Smith & Wesson You will not regret if check price." online Bodyguard 38 Crimson Trace 1.9in 38 Special Matte Black 5rd Smith & Wesson
Bodyguard 38 Crimson Trace 1.9in 38 Special Matte Black 5rd Smith & Wesson.
Chambered in .38 S&W Special +P, the M&P BODYGUARD BG38 continues Smith & Wesson’s broad line of reliable, small-frame self-defense revolvers. The M&P BODYGUARD BG38 delivers the optimal combination of accuracy and simplicity for personal protection needs. With its lightweight design, the M&P BODYGUARD BG38 allows for discreet carry and its hammerless design provides a snag-free presentation. The five-shot revolver features a short 1.9-inch barrel, which contributes to a compact overall length of 6.6 inches and an empty weight of 14.4 ounces. Lightweight and simple to use – nothing protects like a BODYGUARD
Brownells Exclusive Action Enhancement Trigger For Glock® Apex Tactical Specialties Inc.
The Apex Tactical Action Enhancement Trigger for Glock® is a direct drop-in replacement of the factory polymer trigger and reduces pre-travel, overall trigger travel, and trigger reset, provides a smooth uptake and reset while delivering a crisp trigger break.
- Direct drop-in replacement of factory polymer trigger
- Smooths uptake and reset
- Reduces trigger pre-travel, overall travel, and reset distance
- Crisp trigger break
- Center mounted pivoting safety maintains factory safety values
Trigger Only without trigger bar works in nearly all current Glock® model pistols including the G43. The trigger is NOT designed to function in the narrower frame of the model 42. Not for use with a Gen 4 Trigger Bar.
Trigger Only Requires use of customer’s stock Gen 3 trigger bar(and removal of factory trigger) or installation on separately purchased factory trigger bar (NOTE: removing the factory trigger from the trigger bar requires replacement of the complete assembly to go back to stock). Not for use with Gen 4 trigger bar.
NOT FOR USE IN GEN 5 GLOCKS
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:232
Competition Bushing Neck Die Sets Redding.
Redding Competition Bushing Neck Die Set includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Neck Sizing Die and Seater feature micrometer adjustments. Bushings and Shellholder sold separately.
Competition Bushing Neck Die - With this die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized.
Body Die -designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck.
Competition Bullet Seater - Tighter manufacturing tolerances have been made possible due to the details of the floating seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float"
Big Book Catalog, Issue:68, Page:534
Sinclair, Issue:5B, Page:036
Sinclair, Issue:5B, Page:038
Ar-15/m16 9mm Drop-In Conversion Blocks Hahn Precision.
Reliable Feeding With A Host Of Ammo Types; Models For Every Shooting Application
One-piece, machined aluminum block converts AR-15 lower receiver to 9mm. Compatible with all, Colt-type, 9mm upper receivers, the feed ramp is cut for reliable feeding with all types of ammo, including hollow point and frangible ball. Roller retention device holds block securely in receiver, prevents accidental release. Hardened steel ejector, feed ramp and bolt hold open give long service life; last-round-hold-open feature on bottom-loading model works when used with Colt magazines. Also works with modified UZI magazines but last-round-hold-open will not function. No receiver modification required. Top-Loading Block installs from the top of the lower receiver and Bottom-Loading Block installs from the bottom of the lower receiver.
AR-15, Issue:11, Page:011
Big Book Catalog, Issue:71, Page:011
Bake-On Finish Curing Oven Brownells.
Provides A Tough-As-Nails, Oven-Baked Finish
Our high efficiency oven is custom engineered to ensure uniform and complete part curing while delivering a “tough-as-nails” baked-on finish when using Brownells Gun-Kote or Teflon®/Moly oven cure finishes. Advanced technology combines two separate heating elements with a high-tech interior surface to optimize airflow and ensure consistent temperatures that help prevent hot spots, surface blemishes, and discolorations. Thermostat adjustable from 100° F to 400° F for precise temperature control during large or small production runs. Adjustable, 60 minute countdown timer turns oven on when set; audible bell alerts you when time is up, and oven turns off. Front mounted temperature gauge provides accurate, real-time temperature monitoring. Oven panels are insulated with over 5 lbs. of high density, energy-saving fiberglass to prevent heat loss and reduce operating costs. Four, removable drying racks allow you to optimize interior space and maintain full capacity. Two ceiling mounts, with five holes each, allow you to hang parts up to 42" long. Extra long power cord for easy setup in a variety of locations, plus a panel-mounted electrical fuse for fail-safe, overload protection. High-temp, matte black surface finish is corrosion resistant. Holds up to five barreled rifle actions, plus numerous handguns and small parts.
Big Book Catalog, Issue:71, Page:399
SPECS: Steel, black matte, high-temp finish. 15” (38cm) long, 17” (43cm) wide, 48½” (123cm) high. Internal Dimensions - 10” (25cm) long, 13” (33cm) wide, 44” (112cm) high. Temperature Range - 100° F (38°C) to 400° F (204°C). Current Draw - 7.4 amps @ 120 VAC. UL approved heating elements.
1911 Full Size 45acp Magazine 10rd Wilson Combat.
Enhanced High-Capacity Magazines for Your Favorite 1911
Wilson Combat has been renowned for its offering of high-quality 1911 magazines that enhance performance and reliability in a wide range of 1911 pistols on the market. With the introduction of the Wilson Combat 47 Series Full-Size 10-Round Magazine, 1911 owners now have an option that's even more improved than the original.
The Wilson Combat 47 Series Full-Size 10-Round Magazine underwent a dramatic redesign, which works to improve the company's aftermarket offerings to 1911 enthusiasts. The biggest change is the addition of an extended base pad made from polymer, removing the need for an over-insertion tab found on the company's original magazines.
- Caliber: .45 ACP
- Magazine-body walls made from stainless steel measuring .027-inch thick
- Available in black or stainless-steel finish
The 47 Series Full-Size 10-Round Magazine also incorporates a self-lubricating Nylon ETM follower and high-quality springs made from stainless steel to ensure that users receive reliable operation during a long service life.
Big Book Catalog, Issue:71, Page:124
Chargemaster Powder Dispenser / Scale Combo Rcbs.
Throws Precise, Consistent Powder Charges; Programmable Memory Stores Your Favorite Loads
Automated powder measure system combines two precision RCBS products – the Chargemaster 1500 Scale and Chargemaster Automatic Powder Dispenser – that let you meter out exact charges of smokeless powder for almost any-size cartridge. Accurately weighs and dispenses from 2 to 300 grains of any extruded (stick), ball (spherical), and flake smokeless powder. Not only accurate but fast, too, for a “trickle” dispenser: average dispensing time is about 20 seconds for a 60 grain extruded powder charge.
Electronic control lets you simply punch in the exact-size charge you need – and stores up to 30 of your favorite loads in memory for instant recall. The front-to-back layout allows easy access to the scale for right or left-handed users. The clear cover eliminates fluctuations in charge weight caused by air currents. Powder drain lets you easily empty the powder hopper.
Power to the scale is provided by a direct connection from the dispenser to the scale, so there’s is only one power cord to wrangle. If you already own a Chargemaster 1500 scale, the dispenser may be purchased separately.
Do not use with black powder.
1911, Issue:11, Page:068
Big Book Catalog, Issue:68, Page:538
Sinclair, Issue:5B, Page:007
Sinclair, Issue:5B, Page:088
SPECS: Measures and dispenses smokeless powder from 2 to 300 grains, +/–0.1 grain. Models available to operates on 110 or 220 volt AC power. For use with smokeless powder only.