Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International is best in online store. I will call in short word as Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International For those who are seeking Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International review. We've more information about Detail, Specification, Customer Reviews and Comparison Price. I want recommend that you check always the latest price before buying.
Affordable and intensely awesome Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International . and web store for each and every occasion. truck now for the determinative bearing of Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International with shop nearby your home. You can shop this item with right price from online shopping web site. Much more customer reviews tell that the Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International are good quality item and it is also reasonably priced. You canpatronizeAr-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International on-line shopping store. Prior to shop you can verify for price, shipping price and more.
Ar-15 Advanced Combat Bolt Assembly 6.8 Spc Ii/224 Valkyrie Lwrc International.
Upgraded Design For Increased Durability & Dependability
Updated design of the standard AR-15 bolt features a fully supported breech face and a dual-spring extractor system for extra strength and reliability to handle the 6.8 Remington SPC II or 224 Valkyrie cartridge. Machined from an extremely hard steel alloy normally used in high-stress/heat applications like race car transmissions, then shot-peened and x-rayed for flaws before plating with a nickel-boron (NiB) coating. NiB coating significantly reduces friction coefficient, so the bolt is less likely to be hung up by fouling, and wear-resistance is greatly enhanced. Super-slick surface makes cleanup easy because carbon and gunk have a hard time sticking to it.
AR-15, Issue:11, Page:013
Big Book Catalog, Issue:71, Page:013
SPECS: Ultra-hard steel alloy, nickel-boron plated, silver finish. Comes complete with ejector, extractor, and gas rings installed. Fits a standard AR-15 carrier.
Ar-15 30rd Pmag Gen M3 Magazine 223/5.56 Magpul.
Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience
The MAGPUL PMAG GEN M3 polymer magazine continues to revolutionize magazine technology for the AR-15 / M4 platforms. The third-generation PMAG further expands the strength, reliability, and versatility of the original PMAG.
The MAGPUL PMAG GEN M3 is molded from a polymer formula that delivers distinctly greater resistance to crushing and all forms of impact, with extra reinforcement in the mag catch and feed lip areas.
- Long-life USGI-spec stainless steel spring
- Four-way anti-tilt follower and constant-curve internal geometry for reliable feeding
- Tool-less disassembly for easy cleaning
- Pop-off dust cover helps minimize debris intrusion
- Removable floorplate is both stronger and slimmer
- Fully compatible with the HK® 416 and MR556A1, M27 IAR, British SA-80, and FN® SCAR™ MK 16/16S.
The MAGPUL PMAG GEN M3 features pen dot matrix on each side providing consistent ID marking that resists handling wear. PMAG 30 is available with plain, solid sides.
AR-15, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:067
Sinclair, Issue:5B, Page:247
SPECS: Impact/crush-resistant molded hard polymer, Black or Coyote Tan. Compatible with AR-15/M4/M16, HK® 416, MR556A1, M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and other similar lowers. 5.56mm/.223 ammunition only.
Pf940v2 80% Frame Polymer Aggressive Texture For Glock® Polymer80.
Build Your Own Custom Handgun
The Polymer80 PF940v2 80% Frame designed for Glock® pistols brings the do-it-yourself gun build to the next level, allowing Glock® aficionados to build an entire polymer-frame pistol from scratch, all from components shipped right to their front door.
The Polymer80 PF940v2 Frame ships as an incomplete pistol frame, so it isn't classified as a firearm. The company includes a complete finishing jig, along with all of the drill bits and end mill needed to produce a fully functioning pistol frame.
- Can be used with 9mm & .40 S&W Glock® components
- Works only with Gen 3 Glock® parts
- Features aggressively texture frame for enhanced grip
- Available in black, FDE, OD, grey and coyote colors
The Polymer80 PF940v2 also features a locking block and rear rail module made from stainless steel to ensure a lifetime of reliable performance.
Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:216
Aluma-Hyde® Ii Brownells.
Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents
The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. Also available is Semi-Gloss Black which can be used to compliment the matte finishes or give you a black finish that is less matte if you desire. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts.
Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.
Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.
1911, Issue:04, Page:062
AR-15, Issue:04, Page:077
Big Book Catalog, Issue:71, Page:400
SPECS: 12 oz. (340 g) aerosol can.
Romeo5 Compact Red Dot Sight Sig Sauer.
The ROMEO5 features SIG's MOTAC™ (Motion Activated Illumination) which increases battery life by shutting down the system when not in use and instantly activates the system when it senses the slightest vibration or movement. Your sight will be up when you go into action. The ROMEO5 will mount on any platform and the solid aluminum design will give peak performance and years of service. Military units trust the ROMEO5 when it counts, so why wouldn’t you?
The ROMEO5 Compact Red Dot Sight provides the civilian and armed professional with a robust 1x aiming solution optimized for today’s MSR/AR platforms.
- The ROMEO5 combines a leading edge optical design with an extremely robust, lightweight aluminum housing for years of worry-free service at a competitive price point
- The 2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions
- Features our MOTAC™ (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced battery life
- The readily available CR2032 battery is side-loading, allowing for quick battery replacement without having to remove the sight from the firearm
- An integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
- Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
- Includes a M1913 Picatinny low mount riser and co-witness 1.41” and 1.63” riser mounts.
10/22® Bx-Trigger Ruger.
The 10/22® BX-Trigger™ features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel. Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install. The BX-Trigger™ features a Polymer construction and drop-in installation. Fits Ruger® 10/22® rifles or 22 Charger Pistol.
DO NOT DRY FIRE UNLESS A HAMMER BLOCK IN INSTALLED OR TRIGGER IS INSTALLED IN A RUGER® 10/22® RIFLE.
Big Book Catalog, Issue:71, Page:154
Ar-15 30rd Pmag Gen M2 Moe Magazine 223/5.56 Magpul.
Dependable & Nearly Indestructible; Store Fully Loaded Without Loss Of Reliability
Exceptionally rugged, combat- and competition-ready magazine functions flawlessly, even when left fully loaded for extended periods. Corrosion-proof, self-lubricating one-piece body of fiber-reinforced, molded polymer has no spot welds or joints to impair the follower, and the constant internal curve ensures smooth, unobstructed movement of the round stack. Anti-tilt follower stabilizes the stack to help prevent nose-diving and bolt-over-head failures. Heat-treated, stainless steel spring is stress-relieved for optimal performance. Withstands the heat from prolonged full-auto fire and is not harmed by most bore cleaners and solvents. Exterior ribbing provides added gripping surface; magazine catch notch, rather than a traditional hole, keeps dirt and debris out. Easy-to-grasp ledge on floorplate aids in extracting magazine from pouches; floorplate removes easily for cleaning. All models available in Black. DO NOT COME WITH DUST COVERS.
AR-15, Issue:11, Page:060
Big Book Catalog, Issue:71, Page:067
SPECS: Molded polymer, stainless steel spring. 30-round capacity. Available in Black.