Buy at this store.See Detail Online And Read Customers Reviews Silvaloy 355 Silver Solder Brownells prices over the online source See people who buy "Silvaloy 355 Silver Solder Brownells" Make sure the store keep your personal information private before you purchase Silvaloy 355 Silver Solder Brownells Make sure you can proceed credit card online to buySilvaloy 355 Silver Solder Brownells together with store protects your information from fraudulents Make sure the customer support is often there to aid you when you place Silvaloy 355 Silver Solder Brownells order with them

Content:

Silvaloy 355 Silver Solder Brownells.

$29.99 - $109.99
Silvaloy 355 is recommended for joining steel, stainless steel, copper, copper alloys, nickel, nickel alloys and precious metals to themselves or ...

Product Description

Now Color Matches To Stainless Steel; 56% Silver; Cadmium-Free

Silvaloy 355 is recommended for joining steel, stainless steel, copper, copper alloys, nickel, nickel alloys and precious metals to themselves or any combination of these. Has the lowest flow temperature, best wetting and best flow characteristics of any cadmium-free, high silver-content, commercial silver solder. Highly recommended for all silver solder jobs where sheet or flow method is desired. A "must" for installing sights and ramps on stainless steel guns since the almost-white color matches stainless steel beautifully. Use with Ultra Flux®.


Big Book Catalog, Issue:71, Page:383
SPECS: Melts at 1145° F., flows at 1205° F. 56% silver.

Xtr Ii Riflescopes 5-25x50mm Burris.

$1,199.00 - $1,249.00
The XTR II 5-25x50 mm riflescope features a 5-times zoom system and 25% thicker tube construction than the original XTR™ Riflescope. The ...

Product Description

The XTR II 5-25x50 mm riflescope features a 5-times zoom system and 25% thicker tube construction than the original XTR™ Riflescope. The front focal plane reticle design on this and all high-magnification XTR II riflescopes allows the reticle size to increase or decrease as magnification is increased or decreased. Trajectory compensation is always correct and proportional for the selected power setting. This reticle design is also called first focal plane or FFP. It has dimensionally-matched precision adjustment knobs and Zero Click Stop technology. High-performance optics offer Hi-Lume® multi-coated lenses. The lenses optimize target resolution, contrast, and low-light performance. All hand-fitted internal assemblies are triple spring-tensioned for absolute shockproofing, even under severe recoil. They are vibration resistant, even on extended vehicular patrols.

S&w Revolver Exotic Wood Grips Ahrends.

$69.99 - $70.99
Provides a secure gripping surface that still lets clothing slide smoothly to help minimize “printing” on carry guns. Precision shaped, uncheckered Moradillo, ...

Product Description

Beautiful Grain, Improves Control, Ideal For Concealed Carry

Provides a secure gripping surface that still lets clothing slide smoothly to help minimize “printing” on carry guns. Precision shaped, uncheckered Moradillo, Cocobolo or Goncalo Alves brings out the depth and beauty of the wood. Moradillo runs from light brown to dark violet brown. It has contrasting figure and gives a very traditional look to a blued revolver. Reddish brown Cocobolo has contrasting grain stripes of dark red-brown for a distinctive touch of elegance. Fine-grain Goncalo Alves ranges from light reddish-brown to deep red-brown, with irregular, dark brown, almost black, markings. Available with Smooth contour or Finger Groove (FG) for even more control and accuracy. Round-To-Square grips give round butt revolvers the look and feel of a square butt gun for a comfortable, hand-filling grip on target and hunting guns. Retro Target Smooth grips give the appearance of traditional, square-butt S&W target grips, but subtle recontouring helps them fit the hand better for improved control. Concealable Boot is cut flush with the bottom of the grip frame for the smallest possible profile, while deep finger grooves still provide a firm hold on the weapon. Finger-grooved Retro Combat grips give a comfortable, hand-filling grip on target and hunting guns. Retro Banana grips are similar to the Retro Combat style, but without the finger grooves and with a rounded bottom to aid in concealment. Tactical J-Frame is a Finger Groove grip with a slim profile ideal for the small, concealable J-frame revolver.


Big Book Catalog, Issue:66, Page:227

SPECS: Cocobolo (C) or Goncalo Alves (GA), polyurethane finish. Fits Round Butt (Rnd) or Square Butt (Sq) S&W J-, K- or L-frame revolver.

10/22™ Takedown Barrels With Backpacker Stocks Tactical Solutions, Llc.

$385.00 - $409.00
The X-Ring Takedown Barrel & Stock Combo from Tactical Solutions lets you upgrade your Ruger 10/22® Takedown® for better ergonomics and accuracy ...

Product Description

Keeps Your 10/22 Takedown Compact & Portable While Improving Accuracy & Comfort

The X-Ring Takedown Barrel & Stock Combo from Tactical Solutions lets you upgrade your Ruger 10/22® Takedown® for better ergonomics and accuracy without sacrificing its function as a lightweight, compact survival rifle. The Tactical Solutions X-Ring 10/22® TD drop-in replacement for the factory barrel is machined from light 6061 T6 aluminum, with a stainless steel shank and bore liner, to keep weight down while delivering excellent accuracy. Bonuses: the barrel comes with an adjustable rear sight, fiber optic front sight, and muzzle threaded (1/2"-28 tpi) to accept a suppressor or other muzzle device.

The other major component of the Tactical Solution X-Ring Takedown Barrel & Stock Combo is a Magpul X-22 Backpacker stock that preserves your rifle’s takedown capability for convenient storage or transport, while adding a non-slip rubber recoil pad and an ergonomically enhanced forend for excellent support hand comfort and control. There's a pair of interchangeable cheek risers, one for shooting with iron sights, and another, higher one that positions your head at the right height for an optic.

  • Fluted barrel stays cooler & resists accuracy loss due to heat warpage during long shooting sessions
  • Handy storage compartment in the grip for small items
  • Large compartment in buttstock holds three 10-round magazines.
  • Comes with forend and locking mechanism already assembled - drop in your Ruger 10/22 Takedown receiver and go
  • Barrel/forearm unit locks conveniently into buttstock for easy storage in vehicle or backpack
  • Variety of color combinations to give your rifle a distinctive look

The Tactical Solutions X-Ring Takedown Barrel & Stock Combo turns your Ruger 10/22 Takedown into a dependable camping/prepping companion with excellent accuracy potential to boot!


Big Book Catalog, Issue:71, Page:172

Recoil Pad Limbsaver.

$37.99
Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up ...

Product Description

Pre-Fit Pads That Take The Hurt Out Of Shotgun Shooting

Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions.

Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad.

These no longer come with screws.


Big Book Catalog, Issue:71, Page:406

SPECS: NAVCOM synthetic material. Black with black base. Ribbed face. Screw-on replacement requires no fitting for guns with factory recoil pad. Benelli fits 12 gauge, including wood and synthetic stocked M1, Sport, and Super Black Eagle, and synthetic stocked Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger fits Ruger 77/22 All Weather, plus Sako 75 and Tikka T-3 Lite synthetic stocks. Browning Gold also fits Ruger 77 and #1. Mossberg 835/500 fits post-1999 manufactured guns.

Ultralight Spr Scope Mounts Aero Precision.

$75.99 - $83.99
Featuring a rigid, lightweight design, Aero Precisions Ultralight SPR (Special Project Rifle) Scope Mounts complements many high-end optic platforms. These scope mounts ...

Product Description

Featuring a rigid, lightweight design, Aero Precisions Ultralight SPR (Special Project Rifle) Scope Mounts complements many high-end optic platforms. These scope mounts are designed to fit Mil-Spec 1913 Picatinny rails with a cross-slot keyway that offers excellent recoil protection.

These Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

  • Rear ring is pushed forward 2" for better eye relief
  • Designed for AR type upper receivers
  • 6061 T6 extruded aluminum construction
  • Rigid and lightweight
  • Weight: 3.36oz


AR-15, Issue:11, Page:091
Big Book Catalog, Issue:71, Page:094

19 Ls Barrel For Gen3 Glock® 19 9mm Brownells.

$169.99 - $179.99
Build your own custom Glock® style pistol with the Brownells Extended 9mm Barrel for Glock® 19 frames. Taking the ...

Product Description

Build your own custom Glock® style pistol with the Brownells Extended 9mm Barrel for Glock® 19 frames.  

Taking the length of a standard Glock® 17 barrel & slide, Brownells has adapted a longer slide to function on a compact Glock® 19 size frame.  This barrel is required for use with these slides for optimum performance and parts compatibility.  Get the benefits of a long slide & short frame all in one package.  Excellent build choice for those carrying concealed, where slide length isn’t a concern, but grip printing is.  Long slide & barrel allows user to maximize their sight radius, leading to improved shot placement.  

Extended barrel requires the use of Brownells Extended Slides for Glock® 19 frames (Glock® 17 slides will not function).  Compatible with Gen3 Glock® style frames only.

  • Nitride finish for superior durability
  • Available with or without muzzle threads
  • Muzzle threads are ½-28
  • Chambered in 9 mm Luger
  • 1-10 RH 6 Groove Twist
  • Simple drop-in installation
  • 416R Stainless steel
  • Non-threaded barrel length: 4.48"
  • Threaded barrel length: 5.0"

Build a unique Glock® style handgun today with the Brownells Extended Barrel for Gen3 Glock® 19 style frames.
 


Big Book Catalog, Issue:71, Page:219