Nice Reviews Glock® Freedom Edition Action Enhancement Kit Apex Tactical Specialties Inc You can order Glock® Freedom Edition Action Enhancement Kit Apex Tactical Specialties Inc after check, compare the values and check day for shipping. Some people are need it Glock® Freedom Edition Action Enhancement Kit Apex Tactical Specialties Inc in the cheap price. While the item might be priced similarly at different shops.
Glock® Freedom Edition Action Enhancement Kit Apex Tactical Specialties Inc.
Complaints About the Glock Factory Trigger? Here's the Solution!
The Freedom Edition Action Enhancement Kit for Glock® pistols is a drop-in replacement for the plastic factory trigger that reduces pre-travel, overall trigger travel, and reset. Gives you a smooth take-up and reset surrounding a nice, crisp trigger break.
The machined aluminum trigger shoe and safety lever are ergonomically contoured for the finger to nestle comfortably on them - and feel much solider than the plastic trigger. The Freedom Edition’s colorful, two-tone American flag style graphic instantly sets your pistol apart from every other Perfect Pistol on the firing line.
- Distinctive two-tone American flag graphic on trigger shoe
- Approx. 1 lb. reduction in pull weight
- Drop-in installation
- Easily remove kit & reinstall the original parts any time
- Fits Glock® Gen3 and Gen4 model 17, 17L, 19, 22, 23, 24, 26, 27, 31 thru 35 models
- NOT for use in Gen5 Glock pistols (Gen5 version sold separately)
The Freedom Edition Action Enhancement Kit for Glock® pistols includes
Apex's Ultimate Safety Plunger that significantly smooths out the trigger take-up compared to the factory component, while maintaining the factory's critical safety values.
You also get a polished stainless steel Gen3 trigger bar that works fine on Gen4 guns, plus Apex's Performance Connector that reduces the factory trigger pull weight by approximately 1 lb. Couple that with the shorter travel and smoother pull, and we expect Glock critics will be converted to fans!
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
1911 Government Match Grade Parts Kit Nighthawk Custom.
All-Inclusive, Everything-You-Need (Except Receiver) Kit For Building a Custom 1911
Nighthawk’s Match Grade 1911 Parts Kit contains everything you need to assemble a custom Government model pistol. Just add the full-size frame of your choice - with the features you want - and you are ready to build your own Dream Gun™. Not just a "small parts kit, the Nighthawk Match Grade 1911 Parts Kit is a grown-up variation of the model kits you built as a kid - only this one does require some gunsmithing skills.
Except for the sights, ALL components in the Nighthawk Match Grade 1911 Parts Kit are machined from high-grade stainless steel, left "in-the-white" with a fine matte finish. The steel sights are blued to prevent glare from spoiling your sight picture, and the front sight comes with a red fiber optic insert for enhanced visibility. The slide has forward-angled, wide-groove, front and rear serrations. Recoil springs are painted for weight identification.
- Corrosion resistant stainless steel
- Fully machined components for precise fit & finish
- Novak front & rear sight dovetails pre-machined into slide top
- .250" radius on grip safety
- Extensive gunsmithing is required
- Separate kits to build a standard .45 ACP pistol or 9mm Luger chambered 1911
The Nighthawk Match Grade 1911 Parts Kit requires no FFL for purchase, since it does not contain the receiver (FFL item), so it can be shipped directly to your shop or home.
Big Book Catalog, Issue:71, Page:099
Ruger Precision Rifle 6.5 Creedmoor Barrels Prefit 26 Criterion Barrels Inc.
Advance Your Ruger Precision Rifle
The Criterion Ruger Precision Rifle 26-inch barrel is designed to provide owners of Ruger's top-of-the-line Precision Rifle platform with improved accuracy through the use of a high-quality barrel.
The Criterion Ruger Precision Rifle 26-inch barrel is chambered for the 6.5 Creedmoor cartridge and is constructed with a bore that is hand-lapped for the highest quality standards.
- Constructed with stainless steel
- Threaded muzzle with 5/8-24 TPI pitch
- Features 1:8 twist
The Criterion Ruger Precision Rifle 26-inch barrel can be easily changed through the use of Ruger's barrel-nut design, and Criterion sells barrels with both Target and Palma contour designs.
Ar 308 Magazines D&h Industries, Inc..
SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.
Recoil Lugs Hollands Gunsmithing.
Improved Recoil Control
Double-disk ground for uniformity, provides improved accuracy by spreading recoil force over a larger area. Tapered shank won't bind within bedding. Remington is drilled for lug retaining pin (included). Factory barrels will need to have the recoil shoulder set forward.
Big Book Catalog, Issue:71, Page:168
SPECS: 17-4 Stainless steel. Rc 42-44, double disk ground. .250" (6.36mm) thick. Rem - fits Remington 700 and Savage 110, 1.79" (4.5cm) long. Gunsmith installation required.
Ar-308 Warcomp Flash Hider 30 Cal Surefire.
The revolutionary SureFire WARCOMP-762-5/8-24 flash hider, which fits 7.62 (.308 caliber) rifles with 5/8-24 muzzle threads, is the world’s most shootable flash hider. Its patent-pending design provides three valuable functions:
It provides over 99% reduction in muzzle flash compared to a plain muzzle, which helps to conceal the shooter’s location and preserve his dark-adapted vision.
It virtually eliminates muzzle rise, which enhances monitoring target reaction and staying on target for faster follow-up shots.
It serves as a rock-solid mounting adapter for all SureFire SOCOM Series 7.62 mm Fast-Attach® suppressors, which share the same basic design as our SOCOM556-RC model, which placed first in the most extensive and rigorous suppressor testing ever conducted by US Special Operations Command.
Precision machined from US Mill-certified heat-treated stainless steel bar stock — including high-precision single-point cut threads for optimum thread interface — the WARCOMP-762-5/8-24 features an Ionbond DLC coating to provide maximum protection under harsh environmental conditions and to facilitate cleaning even after extreme use.
When used in conjunction with a SureFire SOCOM Series Fast-Attach suppressor, the WARCOMP provides multiple bearing surfaces to ensure superior suppressor alignment and prevent any ringing of tines inside the suppressor. A rear labyrinth seal mitigates gas leaking from the back of a suppressor, minimizes potential carbon buildup in the indexing system, and facilitates suppressor removal after extended firing. Every SureFire WarComp is individually inspected for concentricity and alignment.
For rock-solid mounting of a SOCOM Series suppressor, unparalleled flash reduction, and minimizing muzzle rise, there’s literally nothing like a SureFire WarComp—the world’s most shootable flash hider.
FITS: 7.62 mm (.308 caliber) rifles with 5/8-24 muzzle threads .
MOUNTS: All SureFire SOCOM Series 7.62mm/.308 caliber sound suppressors
NOTE: SureFire SOCOM Series Fast-Attach sound suppressors and current-model WarComps, muzzle brake and flash hider adapters are NOT compatible with previous (non-SOCOM) SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders.
- Patent-pending design provides over 99% flash elimination; virtually eliminates muzzle rise
- Serves as rock-solid mounting adapter for SureFire SOCOM suppressors
- Multiple bearing surfaces provide suppressor alignment and prevent tines from ringing inside suppressor
- Precision machined from US mill-certified heat-treated stainless steel bar stock
- High-precision single-point cut barrel threads for optimum thread interface
- Individually inspected for all critical dimensions, including concentricity and alignment
- Ionbond DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use
- Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system
- Installation requires no permanent modifications to weapon
- Made in the USA and backed by SureFire No-Hassle Guarantee
Ball Style Micrometer Mitutoyo.
The Mitutoyo Ball micrometer features a ball anvil set at right angles to the micrometer head. This allows the handloader to use this tool for measuring wall thickness of brass, tubing, etc. Measures to .0001"" and features a ratchet stop. Micrometer spindle is carbide faced. Scales are easy to read.
Sinclair, Issue:5B, Page:033