Remington 700 Special Triggers Triggertech.
The Rem 700 Special is an upgraded version of the Primary model which further enhances accuracy and precision on any right-handed Remington 700 model rifle. Utilizing CLKR Technology™, and some additional hand refinements, the pull weight on the Special model is quickly and confidently adjusted from 1.0 - 3.5 lbs in ~1oz increments from an externally accessible set screw. Due to the exceptionally crisp break, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured weight. Just like the Primary model, this drop-in trigger provides a true zero-creep break, extremely short overtravel and offers outstanding reliability, even in the harshest environments. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Frictionless Release Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots than you ever thought possible.
All pull weights and measurements are approximate. ***Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range***
Hodgdon Powder Varget Hodgdon Powder Co., Inc..
Hodgdon Powder offers one of the largest selections of quality smokeless propellants for rifle reloading. These powders are very popular with high power and long-range shooters, varmint hunters, and benchrest shooters.
Hodgdon's exclusive line of extruded rifle powders was developed to give shooters consistent performance load after load, in ever the most extreme heat and cold.
Outstanding performance and velocity for 223 Rem, 22-250 Remington, 308 Winchester, 30-06, 375 H and H and many more. Varget is a favorite with varmint hunters and high power shooters.
Big Book Catalog, Issue:68, Page:544
Sinclair, Issue:5B, Page:095
Sig P320 Threaded Barrel 9mm 1/2-28 Silencerco.
Enables You To Install a Sound Suppressor on Your P320
SilencerCo’s SIG P320 Threaded Barrel replaces your pistol’s factory barrel so you’re ready to install a sound suppressor. Each SilencerCo Sig P320 Threaded Barrel comes with a thread protector to keep the threads from being damaged when shooting without a suppressor.
- Machined from durable, high-grade 416R stainless steel
- Non-reflective black nitride finish
- 1/2"-28 tpi threads accept a wide variety of popular pistol suppressors
- 1-10" twist rate preserves your 320’s accuracy
- Models available for both full-size and compact P320
Precision machined to factory specs, the Silencerco SIG P320 Threaded Barrel won’t alter the reliability or performance of your P320.
Co-Ax Reloading Press Forster.
No need to complicate the reloading process, the Forster Co-Ax Press keeps it simple while still delivering famous Forster precision. The Forster Co-Ax Loading Press comes with several unique features that help make it truly one of a kind. The Co-Ax features Snap-in and snap-out die changing. You can actually change from sizer die to seater die in two seconds! A positive spent primer catcher system which passes all spent primers and dirty carbon through a tube and into a container. That helps keep all working parts free of dirt and abrasives. Dual floating guide rods to help ensure perfect alignment.
- Three times the mechanical advantage of an ordinary “C” press.
- Delivers perfect alignment of the die and the case because the shell holder jaws are designed to float with the die.
- Ambidextrous design, no frame support or swinging primer arms to interfere or cause obstructions.
- Unique top priming device ensures primers will be seated straight
- Supplied with “S” jaws. Holds rims from .343” to .422” and .468” to .562”
Big Book Catalog, Issue:68, Page:535
Sinclair, Issue:5B, Page:048
Sinclair, Issue:5B, Page:062
Pf940cv1 80% Frame Aggressive Texture For Glock® 19/23/32 Od Grn Polymer80.
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.
The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling - the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.
- Compatible with Gen3 Glock® Components. Not Compatible with Gen4
- Improved next generation ergonomics make for a great shooting pistol
- High strength reinforced polymer construction provides a great basis for a reliable & durable gun
- Aggressive texture on the PF940Cv1 ensures positive retention
- Picatinny rail is compatible with all standard lights, lasers & accessories
- Stainless steel locking block ensures positive operation & a lifetime of use
- Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse
- Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid
- Includes complete finishing jig
- Jig includes drill bits and end mill, allowing for complete construction
The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.
The PF940Cv1 is compatible with Glock® 19/23/32 frame components.
Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:216
Champion Aluminum 9mm Luger 115gr Fmj Ammo Federal.
Federal Champion 9mm Luger ammunition. This ammunition is great for plinking or trainging at the range. Ammunition features an aluminum case and full metal jacketed bullet.
You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition. All ammunition must be shipped Domestic Ground. Shipping not available for International residents. Residents in CA, DC, DE, IL, MA, NY, CT, NJ and OH may have additional restrictions. Always make sure you use the correct ammunition for your firearms. Check your state and local laws for any other applicable firearms and ammunition regulations. Due to Department of Transportation regulations, we cannot accept returns on ammo. Please check local laws before ordering. View full restrictions here.
Ammunition pricing is per box. ATTENTION – California Customers
Brownells is still shipping ammunition orders to California but the process has changed to comply with California Proposition 63. We must now ship ammunition purchased online to an FFL or California-approved ammunition dealer. After placing your order, a Brownells representative will contact you to ensure your ammunition arrives quickly and in compliance with the law.
Turbo Sonic Power Professional Ultrasonic Cleaner Lyman.
Turbo Sonic Power Professional Ultrasonic Cleaner
Lyman has introduced the market's largest and most powerful ultrasonic cleaning system: The Turbo Sonic Power Pro. This system's extra long, heated tank and ten powerful industrial transducers allow gunsmiths, armorers or any shooter to quickly and easily clean, lubricate and protect the widest range of metal items.
Designed for high volume cleaning or for larger than normal items, the new Turbo Sonic Power Pro's 34-3/4" heated stainless steel tank can easily handle most barreled actions, upper receivers, as well as quantities of handguns. The powerful industrial transducers aggressively deep clean and degrease items, both inside and out. In fact, the Power Pro is such an effective cleaner that Lyman recommends that cleaned parts immediately be ultrasonically treated with Lyman's Turbo Sonic Gun Lube. Changing from cleaning to lubrication is easy with the built in drain system.
Designed for volume professional usage, the Power Pro features an all stainless design and professional controls. For complete control of the process, the Power Pro has both a timer and an adjustable heat control. Temperatures up to 175 degrees can be selected.
Turbo Sonic "Power Pro" Accessory Lube Tank
Now, users of Lyman's industrial strength Power Pro ultrasonic cleaner can easily and completely lube parts without draining the cleaning solution from the unit. This rugged, stainless tank is designed to sit in the Power Pro's cleaning tank wich remains filled with cleaner. The unit's powerful ultrasonic action is transmitted through the cleaning solution into the accessory tank filled with lube. No tank draining or cleaning is required.Thoughtfully designed, the accessory tank's side support brackets and large handles make fast installation and removal easy. This new accessory tank makes the transition from cleaning to lubrication fast and trouble-free resulting in huge time savings.
- A perfect and necessary accessory for the Power Pro Ultrasonic Cleaner.
- Allows deep ultrasonic cleaning and sonic lubrication in the same unit.
- Allows firearms to be lubricated without draining cleaning solution.
- Side brackets support the accessory tank allowing it to sit in the cleaning solution, transferring the ultrasonic action to the lube.
- Tough, welded metal construction.
- Large handles make moving the tank easy.
- Huge time savings when cleaning multiple firearms
Big Book Catalog, Issue:71, Page:327
Sinclair, Issue:5B, Page:076
SPECS: Turbo Sonic Power Pro (115V) Stainless Steel; Tank Size 35.75 x 8 x 6.25 inch / 90.8 x 20.5 x 15.9 cm; Unit Size (w/out wheels or drain) 38.5 x 10.75 x 14 inch / 97.8 x 27.3 x 35.6 cm; Longest Item that can fit in tank 34 in./86.3 cm; Ultrasonic frequency 40,000 Hz; Timer 1 to 20 minute full range; Temperature Settings 68 - 176 degrees F / 20 - 80 degrees C; Net Weight 73 lbs / 33 kg.