Vertical Reticle Instrument Exd Engineering Reviews : Get best Vertical Reticle Instrument Exd Engineering With Quality. You Want in Best Store.
 
Content:

Vertical Reticle Instrument Exd Engineering.

$57.99
Adjustable, self-aligning V-blocks with integral spirit level makes zeroing your scope faster and far more accurate. Enhances final scope accuracy by squaring ...

Product Description

Accurate Check For Perfectly Aligned Scope Crosshairs

Adjustable, self-aligning V-blocks with integral spirit level makes zeroing your scope faster and far more accurate. Enhances final scope accuracy by squaring the crosshairs to the bore. Even a slight cant of the crosshairs can reduce overall accuracy, change point of impact and increase the likelihood of missed "bulls" or wounded game.


Big Book Catalog, Issue:71, Page:459
SPECS: Aluminum, anodized finish, black. 5-1/2" (14cm) long, 2" (5cm) wide. Includes complete instructions.

Leupold Torx Screws Brownells.

$9.99 - $20.99
Refill your Leupold factory screw kit or keep these extra-strong, heat-treated screws on hand for your customers and yourself. We’ve put together the ...

Product Description

Convenient 12 Paks Of The Most Useable Sizes For Scope Mounting Applications

Refill your Leupold factory screw kit or keep these extra-strong, heat-treated screws on hand for your customers and yourself. We’ve put together the most requested screw sizes in money-saving 12 Paks so it’s easier to ­convert existing rings and bases to Torx head without having to buy more than you need. These are the same screws used by ­Leupold but will fit many other brands of rings and bases.


Big Book Catalog, Issue:71, Page:378

SPECS: Steel, blue (BL) or stainless steel (SS), bright finish. 12 screws per pak. All lengths listed are nominal shank length.

Standard Boresighter Bushnell.

$78.99
Optical collimators save you time and ammunition by getting your rifle or handgun “on paper” without firing a shot. Gives hunters, target ...

Product Description

Fast, Accurate Sight-In System Gets "On Paper" Without Firing A Shot

Optical collimators save you time and ammunition by getting your rifle or handgun “on paper” without firing a shot. Gives hunters, target shooters, and gunsmiths the convenience of initial sighting-in of scopes and sights at home or in the shop. Easy-to-use: attach collimator to the muzzle, then adjust the windage and elevation of the scope or iron sights until they align with the collimator grid. Sights centered on the grid will shoot very close to point-of-aim at 100 yards. Collimator is CNC-machined from aluminum, then hardcoat anodized to protect the finish from nicks, dings, and surface wear. Includes convenient carrying case that protects from damage and keeps each item clean and ready to use. Standard model features 15 steel arbors that fit bores ranging from .177 to .50 caliber, including popular metric calibers, to provide precise alignment with the collimator for extremely accurate sight adjustment. Roll-up storage case easily fits in your range bag or tool box.


Big Book Catalog, Issue:71, Page:460

SPECS: Collimator - Aluminum, hardcoat anodized finish, matte black. Standard contains (1) insert of each caliber: .177, .22, .25, .27, 6mm, 6.5mm, 7mm, .30, .32, .338, .35, .375, .44, .45, .50 . Collimator - 4¾" (12cm) long. Inserts - Steel, 3¾" (9.5cm) long. Case - Vinyl, black. 3¼" (8.2cm) diameter x 5½" (14cm) wide, rolled up.

Ar-15/m16 Sight Wrenches Brownells.

$10.99
Even tho' you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've ...

Product Description

Models For A1 & A2 Make Sight Adjusting Quick & Easy

Even tho' you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've tried know it's just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy.


AR-15, Issue:11, Page:082
AR-15, Issue:11, Page:083
AR-15, Issue:11, Page:085
Big Book Catalog, Issue:71, Page:084
Big Book Catalog, Issue:71, Page:085
Big Book Catalog, Issue:71, Page:087
SPECS: 1-3/8" (3.5cm) long x ¾" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Dead Level Scope Leveling Device Badger Ordnance.

$139.99
The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being ...

Product Description

The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being perfectly level with the scope body. Simply attach your mounted scope to the Dead Level, level the device with the precision thumbscrews to center up the bulls-eye level, then just level the reticle with a predetermined level line or plumb bob. Aluminum Mil. Spec. Now features an Anodized Hard Coat Type III in a crimson and black finish. Instructions included.

FOR USE WITH MIL STD 1913 PICATINNY COMPLIANT RINGS AND MOUNTS
 

Front Sight Pusher Williams Gun Sight.

$15.99 - $65.99
In the past, there was only one acceptable way to install a front sight in a ramp - pound it in with ...

Product Description

Easiest Way to Install A Front Sight In A Ramp

In the past, there was only one acceptable way to install a front sight in a ramp - pound it in with a hammer from the side. This method frequently marred a beautiful finish and loosened or damaged the ramp.

The Williams Front Sight Pusher is the easiest and best way to install a front sight in a ramp. Equalizing the pressure on ramp and sight, it permits installation without marring or damaging. Eliminates excessive pressure on the ramp. Smoothly, accurately moves sight into exact position.

This is only for a ramped front sight and will not work on any pistol sights.


Big Book Catalog, Issue:71, Page:468
Big Book Catalog, Issue:71, Page:484

SPECS: Aluminum body is 43/8" (11.1cm) long x 1" (2.5cm) wide x 13/8" (3.5cm) high. Screw is steel.

Professional Boresighter Bushnell.

$105.99
Optical collimators save you time and ammunition by getting your rifle or handgun “on paper” without firing a shot. Gives hunters, target ...

Product Description

Optical collimators save you time and ammunition by getting your rifle or handgun “on paper” without firing a shot. Gives hunters, target shooters, and gunsmiths the convenience of initial sighting-in of scopes and sights at home or in the shop. Easy-to-use: attach collimator to the muzzle, then adjust the windage and elevation of the scope or iron sights until they align with the collimator grid. Sights centered on the grid will shoot very close to point-of-aim at 100 yards. Collimator is CNC-machined from aluminum, then hardcoat anodized to protect the finish from nicks, dings, and surface wear. Includes convenient carrying case that protects from damage and keeps each item clean and ready to use. Professional model has adjustable arbors for .22 to .270, 7mm to .35, and .35 to .45 calibers, plus a separate insert for .177 caliber. Everything fits in the included hard-sided carrying case.


Big Book Catalog, Issue:71, Page:460
Sinclair, Issue:5B, Page:216

SPECS: Collimator - Aluminum, hardcoat anodized finish, matte black. Professional contains 3 adjustable inserts: .22 to .270, 7mm to .35, and .35 to .45 calibers, plus a .177 cal. fixed insert. Inserts - Steel, expandable, 4½" (11cm) long; fixed .177 cal., 31⁄8" (8cm) long. Collimator - 4¾" long. Case – Vinyl covered, hard sided, black. 53⁄8" (13.6cm) long x 21⁄8" (5.4cm) wide, 3½" (9cm) high.