Best Price Tactical Scope Base Conversion Kit Brownells Nevertheless, I hope until this reviews about it Tactical Scope Base Conversion Kit Brownells will end up being useful. And hope I'm a section of allowing you to get a much better product. You will have a review and practical knowledge form here. I really hope you will ensure and buying among Tactical Scope Base Conversion Kit Brownells soon after read this best reviews

 

Content:

Tactical Scope Base Conversion Kit Brownells.

$51.99 - $54.99
Keep those heavy tactical scopes, rings and bases locked solidly to the receiver by converting your rifle's 6-48 mount screws to the stronger ...

Product Description

Strong, 8-40 Screws Help Prevent Scope "Flyoff"

Keep those heavy tactical scopes, rings and bases locked solidly to the receiver by converting your rifle’s 6-48 mount screws to the stronger 8-40 screw size. Kit contains everything you need: 12 each of 8-40 x 1⁄4" and 3⁄8" Socket or Torx head screws, #19S and #28S drill bit, a taper tap and a bottom tap, plus one Fillister counterbore and our Screw Gizzie.


Big Book Catalog, Issue:71, Page:379
SPECS: Screws are steel, blued. High speed steel drill bits, taps and counterbore. Refills sold per 12 pak.

Ak47 Campy Bob Sight Tool Power Custom.

$32.99
For AK-47 and SKS rifles with standard sights Precision made for ease of use ...

Product Description

  • For AK-47 and SKS rifles with standard sights
  • Precision made for ease of use
  • Rear sight installation and removal tool
  • One tool per package

Just try to install or remove the rear sight on an AK-47 rifle without making your thumb bleed. The next time you install or remove the AK-47 rear sight, do it with the Power Custom AK47 Campy Bob Sight Tool. Each tool is manufactured out of the finest materials for a long working life and for ease of use. It makes rear sight changes to your AK-47 rifle painless.

SPECS: For AK-47 and SKS rifles.

Site-A-Line Spuds Alley Supply/sweeny Sitealine.

$15.99
Chrome-plated, precision-ground spuds have hardened bronze springs.

Product Description

Chrome-plated, precision-ground spuds have hardened bronze springs.


Big Book Catalog, Issue:71, Page:460

Fillister 6-48 Sight Screw Counterbore Brownells.

$25.99
Overall 2½; Body Dia. .218; Pilot Dia. .137; Pilot Length 1⁄8; 90° Shoulder. Use Drill No. 28 for Pilot Hole.

Product Description

High-Speed Stee; For Popular Sight Screws; Made To Our Exact Spec For Most Sight Base Screws

Overall 2½"; Body Dia. .218"; Pilot Dia. .137"; Pilot Length 1⁄8"; 90° Shoulder. Use Drill No. 28 for Pilot Hole.


Big Book Catalog, Issue:71, Page:378

Torx Screw Kit Leupold.

$44.99
Contains 50 each: 8-40 x .278, black ring screws. 20 each: 8-40 x .278 silver ring screws; 6-48 x .210 black and ...

Product Description

Torx Head Screws For Leupold Bases & Rings

Contains 50 each: 8-40 x .278", black ring screws. 20 each: 8-40 x .278" silver ring screws; 6-48 x .210" black and silver base screws; 6-48 x .295" black and silver base screws.


Big Book Catalog, Issue:71, Page:379

Collimator Elevator W. Frear Innovations.

$110.99
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted ...

Product Description

Adapts Your Collimator For Use With Large Objective Optics

Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.


Big Book Catalog, Issue:71, Page:460

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

Scopesmith Mounting Tool Leupold.

$20.99
Convenient, folding tool with the right bit sizes to fit nearly all scope mounting needs. Four hex drivers from .050 to 9/64. Two ...

Product Description

Handy Size, Use At The Bench, Take To The Range

Convenient, folding tool with the right bit sizes to fit nearly all scope mounting needs. Four hex drivers from .050" to 9/64". Two TORX wrenches, T-15 and T-25, fit most ring and base screws. 1/4" flat blade, general purpose, screwdriver; use as is or grind to an exact fit.


Big Book Catalog, Issue:71, Page:459
Sinclair, Issue:5B, Page:021
Sinclair, Issue:5B, Page:175
SPECS: Drivers; Chrome vanadium steel, blue, matte finish. Handles; fiber reinforced resin, black.