How about Laser Boresighter Site-Lite You can order Laser Boresighter Site-Lite after check, compare the costs and check day for shipping. Some people are are interested to buy Laser Boresighter Site-Lite at the cheap price. While the item may be priced similarly at different shops.
Laser Boresighter Site-Lite.
Gets You Close To Point Of Aim Without Firing A Shot
Saves range time and ammo; highly accurate laser system lets you zero your scope to point-of-aim at 100 yards, before you go to the range. Quick and easy to use, just place the special laser target 25 feet away and aim the laser at it, then adjust the scope till the crosshairs align with the target. Works equally well with red dot scopes and iron sights. Laser is mounted to a cone shaped, aluminum spud. An O-ring and a powerful magnet hold the spud centered in the bore. No special adapters to buy and no metal contacts the rifling. A system of adapters and O-rings lets one unit fit all firearms from .22 to .50 caliber, plus 12 and 20 gauge shotguns. Also includes the SRL-100 adapter that slips over the Boresighter's lens to convert it into a highly accurate Scope Reticle Leveler by refocusing the laser to a horizontal beam for precise crosshair alignment. SRL-100 also available separately. SL-100 Standard Model for use indoors, where you have control over ambient lighting. SL-150 Ultra-Mag has an ultra-bright 635mm laser for better visibility in bright, ambient light conditions. SL-500 Ultra-Mag uses a super-bright green laser for maximum visibility of the sighting dot in daylight and very bright ambient light.
Must ship UPS Ground.
Big Book Catalog, Issue:71, Page:460
Big Book Catalog, Issue:71, Page:461
SPECS: Aluminum. Includes (2) adapters, (12) O-rings, (2) cardboard target cards, SRL-100 adapter, instructions, and plastic storage case. SL-100 - 6-1⁄8” (15.6cm) OAL without adapter, 4-1⁄8” (10.5cm) long spud. Uses (2) #357/ LR-44 batteries, included. SL-150 – 6-5⁄8” (16.8cm) OAL, 4¼” (10.8cm) long spud. Uses (1) CR2 lithium battery, included. SL-500 – 7½” (19.1cm) OAL, 4¼” long spud. Projects a green sighting dot. Uses (1) CR123 lithium battery, included. SRL-100 – Includes calibrated laser target, bubble level, and instructions.
Laser Boresighter Sightmark.
Chamber-Mounted Laser Helps You Sight In Rifle Or Pistol Without Firing A Shot
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on the dot, compensating for sight offset to prevent gun from shooting high. Go to the range for test shots and final sight adjustments. Store boresighter in the included nylon carrying case that fits easily in a pocket, tool kit, or range bag. Available in a variety of calibers, listed below.
Big Book Catalog, Issue:71, Page:460
SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2” at 100 yards. Includes (2) AG5 button cell batteries, nylon carrying case, and instructions. .223 Rem also fits .222 Rem, 5.56 x 45 NATO, 5.6 x 50, 6 x 47. 7mm Rem/.264 Win also fits 8mm Rem, .338 Win. .30-06 also fits .25-06, .270 Win, .280 Rem, 7mm Express, 7.7 Japanese, 8mm-06, .338-06, and .35 Whelan. .308 also fits 6mm Rem, .243 Win, .257 Roberts, .260 Rem, .284 Win, 7mm-08, .307, .356, and .358 Win.
1911 Front Sight Staker Brownells.
Makes Sight Staking Easier
Makes front sight staking effortless, faster and far more accurate. Improved, offset punch design efficiently directs the full force of the hammer blow downward against the sight tenon. Hardened, "V"-shaped tip easily displaces both wide and narrow tenons for a great-looking, tight-fitting front sight that won't shoot loose. Large, square shaft is easier to hold, see and hit so there's less chance of a missed hammer blow striking your customer's expensive slide.
1911, Issue:11, Page:053
1911, Issue:11, Page:062
Big Book Catalog, Issue:71, Page:144
Big Book Catalog, Issue:71, Page:151
Big Book Catalog, Issue:71, Page:471
SPECS: Steel, blued. 5/16" (7.9mm) x ½" (12.7mm) x 4½" (11.4cm) long shaft. Replaceable, hardened steel tip. Fits 1911 Auto. Includes complete instructions.
Sinclair Scope Ring Lapping Kits Sinclair International.
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind, whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings.
The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment.
Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive amounts of windage and elevation which moves the scope farther from its optical center. The farther you are from the optical center, the more likely you are to have distortion and a darker sight picture.
Sinclair Scope Ring Lapping Tools ( 1 inch, 30mm, 34mm, 35mm) are made from ground accuracy stock stainless steel that has a tolerance of +/-.0005 inch. Each Sinclair Lapping Tool comes with the lapping bars are 10 inch in length, which gives you plenty of stroke length to quickly lap your scope rings.
Sinclair, Issue:5B, Page:215
Range Master Comp Universal Sight Tool W/30™ Bevel Pusher Block Mgw.
Limited Time Offer! FREE 30? Bevel Block Included - While Supplies Last!
The MGW Rangemaster Universal Sight Tool comes from the factory with a pusher block for rear sights with straight sides. Now, for a limited time, we’re including a 30° Bevel Pusher Block AT NO EXTRA CHARGE! This gives you a big increase in your Rangemaster’s versatility by enabling your to use it on the angled rear sights of Glock®, Hechler & Koch, and similar pistols.
The MGW Rangemaster Universal Sight Tool makes removing, installing, and adjusting dovetail sights on semi-auto handguns easy and fast, without the risk of damaging the slide. At the core is a sturdy, durable, aluminum tool body with stainless steel hardware. This diminutive tool takes up very little space on your work bench and is a cost effective way to adjust the sights on variety of handguns.
- Includes pusher blocks for (1) straight-side sights and (2) 30° beveled-side sights
- Also accepts all MGW gun-specific pusher blocks designed for their Sight Pro tool
- Block machined from high-grade hardened steel
- .750" reach from the backside of the slide underlug to the front sight
- Uses the same gun-specific slide shoes (sold separately) as the original Sight Pro
The MGW Rangemaster Universal Sight Tool & 30° Bevel Pusher Block combo is available for a limited time only. Snag yours before we run out!!
Professional Reticle Leveling System Wheeler Engineering.
Professional Retical Leveling System: The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.
The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.
Glock 42/43 Adapter Kit Mgw.
Glock 42/43 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the compact Glock 42 and 43 pistols. The adapter kit includes the adapter spacer and the shoe.
Does not include sight pusher body
Big Book Catalog, Issue:71, Page:477