Buy 1911 Front Sight Staker Brownells Nevertheless, I hope until this reviews about it 1911 Front Sight Staker Brownells will end up being useful. And hope I am a section of assisting you to get a far better product. You will receive a review and expertise form here. I'm hoping you will ensure and buying among 1911 Front Sight Staker Brownells after read this review

 

Content:

1911 Front Sight Staker Brownells.

$15.99 - $49.99
Makes front sight staking effortless, faster and far more accurate. Improved, offset punch design efficiently directs the full force of the ...

Product Description

Makes Sight Staking Easier

Makes front sight staking effortless, faster and far more accurate. Improved, offset punch design efficiently directs the full force of the hammer blow downward against the sight tenon. Hardened, "V"-shaped tip easily displaces both wide and narrow tenons for a great-looking, tight-fitting front sight that won't shoot loose. Large, square shaft is easier to hold, see and hit so there's less chance of a missed hammer blow striking your customer's expensive slide.


1911, Issue:11, Page:053
1911, Issue:11, Page:062
Big Book Catalog, Issue:71, Page:144
Big Book Catalog, Issue:71, Page:151
Big Book Catalog, Issue:71, Page:471

SPECS: Steel, blued. 5/16" (7.9mm) x ½" (12.7mm) x 4½" (11.4cm) long shaft. Replaceable, hardened steel tip. Fits 1911 Auto. Includes complete instructions.

Sinclair Scope Ring Lapping Kits Sinclair International.

$3.95 - $79.99
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece ...

Product Description

Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind, whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings.

The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment.

Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive amounts of windage and elevation which moves the scope farther from its optical center. The farther you are from the optical center, the more likely you are to have distortion and a darker sight picture.

Sinclair Scope Ring Lapping Tools ( 1 inch, 30mm, 34mm, 35mm) are made from ground accuracy stock stainless steel that has a tolerance of +/-.0005 inch. Each Sinclair Lapping Tool comes with the lapping bars are 10 inch in length, which gives you plenty of stroke length to quickly lap your scope rings.


Sinclair, Issue:5B, Page:215

Range Master Comp Universal Sight Tool W/30™ Bevel Pusher Block Mgw.

$256.99
The MGW Rangemaster Universal Sight Tool comes from the factory with a pusher block for rear sights with straight sides. Now, for ...

Product Description

Limited Time Offer! FREE 30? Bevel Block Included - While Supplies Last!

The MGW Rangemaster Universal Sight Tool comes from the factory with a pusher block for rear sights with straight sides. Now, for a limited time, we’re including a 30° Bevel Pusher Block AT NO EXTRA CHARGE! This gives you a big increase in your Rangemaster’s versatility by enabling your to use it on the angled rear sights of Glock®, Hechler & Koch, and similar pistols.

The MGW Rangemaster Universal Sight Tool makes removing, installing, and adjusting dovetail sights on semi-auto handguns easy and fast, without the risk of damaging the slide. At the core is a sturdy, durable, aluminum tool body with stainless steel hardware. This diminutive tool takes up very little space on your work bench and is a cost effective way to adjust the sights on variety of handguns.

  • Includes pusher blocks for (1) straight-side sights and (2) 30° beveled-side sights
  • Also accepts all MGW gun-specific pusher blocks designed for their Sight Pro tool
  • Block machined from high-grade hardened steel
  • .750" reach from the backside of the slide underlug to the front sight
  • Uses the same gun-specific slide shoes (sold separately) as the original Sight Pro

The MGW Rangemaster Universal Sight Tool & 30° Bevel Pusher Block combo is available for a limited time only. Snag yours before we run out!!

 

Professional Reticle Leveling System Wheeler Engineering.

$39.99
Professional Retical Leveling System: The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope ...

Product Description

Professional Retical Leveling System:  The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.

 The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.

Glock 42/43 Adapter Kit Mgw.

$33.33
Glock 42/43 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the compact Glock 42 and 43 pistols. The ...

Product Description

Glock 42/43 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the compact Glock 42 and 43 pistols.  The adapter kit includes the adapter spacer and the shoe.

Does not include sight pusher body


Big Book Catalog, Issue:71, Page:477

Universal Sight Mounting Fixture & Components Forster.

$2.99 - $364.99
The Foster Scope Mounting Jig fills the exacting requirements of the most particular gunsmith. Will handle virtually all bolt action, lever action and ...

Product Description

The Accurate, Professional Way To Mount Scopes & Sights

The Foster Scope Mounting Jig fills the exacting requirements of the most particular gunsmith. Will handle virtually all bolt action, lever action and pump guns! You have only to spoil one good gun with a faulty job and you've spent the price of the jig. We have sold a great number of these to gunsmiths during the recent years. The universal comment when we meet scope jig buyers later is "I don't know how I ever did business without it. Would rather almost do without my right arm than lose it now!"

The Forster Universal Sight Mounting Fixture was designed to fill the exacting requirements encountered in drilling and tapping holes for the mounting of scope mounts, receiver sights, shotgun beads, etc. The Fixture will handle virtually all bolt action, lever action and pump action guns including the Savage 99, Remington 760, etc.; in fact, any single barrel gun as long as the barrel can be laid into the "V" blocks of the Fixture. Tubular magazine guns are done in the same manner by first removing the magazine tube.

The Fixture will locate the holes to a standard, predetermined spacing built into the over-arm, or to any other spacing by sliding the over-arm in either direction. "Run out" of the drill is eliminated as it is guided through a hardened and ground drill bushing. Tapping is done through another bushing of the correct tap size, and eliminates cocking of the tap which is a major cause of tap breakage and sloppy holes. The sliding over-arm has three holes with standard spacing of .500" and .860" between centers into which the interchangeable drill and tap guide-bushings fit. The over-arm is keyed and slides in a "T" slot. It is always in true alignment with the exact center of the gun barrel.

The main body of the Fixture is cast aluminum. The two "V" blocks are adjustable for height and made of hardened steel accurately ground on the "V" as well as the shaft. Accuracy in every detail has been the first consideration!

It is truly a precision fixture that will save its cost over and over again while allowing you to do a really first class job on every gun that comes into your shop.


Big Book Catalog, Issue:71, Page:459
Big Book Catalog, Issue:71, Page:469
SPEC: Approx. 20" (50.8cm) long. Comes complete with Drill and Tap Bushing Set for 6-48. Other bushings sold below.

Vertical Reticle Instrument Exd Engineering.

$57.99
Adjustable, self-aligning V-blocks with integral spirit level makes zeroing your scope faster and far more accurate. Enhances final scope accuracy by squaring ...

Product Description

Accurate Check For Perfectly Aligned Scope Crosshairs

Adjustable, self-aligning V-blocks with integral spirit level makes zeroing your scope faster and far more accurate. Enhances final scope accuracy by squaring the crosshairs to the bore. Even a slight cant of the crosshairs can reduce overall accuracy, change point of impact and increase the likelihood of missed "bulls" or wounded game.


Big Book Catalog, Issue:71, Page:459
SPECS: Aluminum, anodized finish, black. 5-1/2" (14cm) long, 2" (5cm) wide. Includes complete instructions.