What is the best price for Xd/xdm Drop In Trigger Kits Powder River Precision Inc You can order Xd/xdm Drop In Trigger Kits Powder River Precision Inc after check, compare the prices and check day for shipping. Some people are are interested Xd/xdm Drop In Trigger Kits Powder River Precision Inc with the cheap price. While the item might be priced similarly at different shops.

Content:

Xd/xdm Drop In Trigger Kits Powder River Precision Inc.

$105.99 - $115.99
The Powder River Precision XD/XDM Drop In Trigger Kit contains their famous striker safety lever, which removes the long trigger pre-travel ...

Product Description

APG Approved The Powder River Precision XD/XDM Drop In Trigger Kit contains their famous striker safety lever, which removes the long trigger pre-travel on XD triggers. The kit includes reduced power; trigger spring, sear spring, striker safety spring, and striker spring. These reduced power springs allow for a lowered pull weight. The PRP Drop in Trigger is constructed of lightweight polymer that assists in speeding up trigger reset. It also has an integral over travel stop on the back of the trigger. This integral stop removes added stress on the trigger bar that is present with other over travel stop methods. When installed, this kit provides a short, crisp trigger pull (3.5-4.5lbs) with a fast reset and shortened overall trigger pull length. Available for all XD/XDM except for the 45 XD with thumb safety. The XDM model has received the American Pistolsmith Guild Seal of Approval.


Big Book Catalog, Issue:71, Page:235

SPECS: Polymer trigger. Reduced power trigger, striker and strike springs. 3.5-4.5lbs pull weight. NOTE: The XD Sub Compact (100-009-750) is for 9mm/.40 only. Does NOT fit XDS. Use 100-009-749 for all the XD .45 models EXCEPT the .45 cal thumb safety model.

S&w M&p Action Enhancement Polymer Trigger & Duty/carry Kit Apex Tactical Specialties Inc.

$113.99
Apex Tactical’s Polymer Action Enhancement Trigger Kit is engineered to give the S&W M&P 9mm / .40 a smoother, more consistent, lighter ...

Product Description

Gives Your M&P 9mm/.40 a Smoother, Lighter, More Consistent Trigger Pull

Apex Tactical’s Polymer Action Enhancement Trigger Kit is engineered to give the S&W M&P 9mm / .40 a smoother, more consistent, lighter (5 to 5-1/2 lb.) trigger pull with a shorter reset than the factory trigger. The Apex M&P 9mm / .40 Polymer Action Enhancement Trigger Kit reduces trigger pre-travel and over-travel by approximately 20%, while the rounded face gives the shooter’s finger a comfortable surface when firing.

  • Keeps safe trigger pull weight for duty/carry applications
  • Center mounted pivoting safety maintains factory safety values
  • Works with all S&W M&P pistols in 9mm and .40 S&W
  • Will NOT work in M&P45, M&P M2.0, M&P Shield, or .22 LR models

The Apex M&P 9mm/.40 Polymer Action Enhancement Trigger Kit is designed to drop in and normally should not require further gunsmithing. However, armorer or gunsmith installation is recommended. Kit includes: trigger, heavy duty sear spring, fully machined sear, duty/carry spring set, Ultimate Striker Block Kit, and slave pin for installing trigger return spring.


Big Book Catalog, Issue:71, Page:233

Sig Sauer P320 Advanced Trigger With Forward Set Trigger Bar Apex Tactical Specialties Inc.

$124.95
If you’re looking for a big improvement in your SIG P320’s trigger pull, the Apex Tactical Advanced Trigger with Forward Set Trigger ...

Product Description

Lighter, Shorter Pull & Faster Reset Without Compromising Reliability

If you’re looking for a big improvement in your SIG P320’s trigger pull, the Apex Tactical Advanced Trigger with Forward Set Trigger Bar is for you. The Forward Set Trigger Bar reduces the P320’s trigger pull length by approximately 40% and shortens the reset by about 20%. The shorter, less creepy pull helps you shoot more accurately, while the shorter reset aids in making faster follow-up shots.

The Advanced Trigger features reengineered geometry that reduce the trigger pull significantly without requiring lighter springs, thus preserving your P320’s reliability. Available with a traditional Curved Face with an approximately 6.25 lb. pull or Apex’s specialty Flat Face, which some shooters prefer, that reduces pull to about 5.75 lbs. Either way, you get a shorter, lighter, better feeling trigger!

  • Drop-in - NO tools are required for installation,
  • Swap factory parts back in any time
  • Curved model - 6.25 lb. trigger pull
  • Flat Face model - 5.75 lb. pull
  • Both models work in ALL P320 models
  • Trigger will not interfere with the pistol's drop-test safety.

Apex Tactical’s SIG P320 Advanced Trigger with Forward Set Trigger Bar enables you to upgrade the pistol’s good factory trigger to a superb trigger normally attainable only through the work of an expensive custom pistolsmith.


Big Book Catalog, Issue:71, Page:233

S&w Shield Action Enhancement Trigger & Duty/carry Kit Apex Tactical Specialties Inc.

$88.30 - $157.99
The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces Trigger ...

Product Description

The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces Trigger pre-travel and over-travel by approximately 20%.  It features a flat face with a center mounted pivoting safety.  The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face.  The flat, smooth face trigger causes the shooter to place their finger on the center line of the trigger and encourages trigger manipulation directly in line with the bore axis.  The Shield Action Enhancement Trigger is perfect for use with the M&P Shield already equipped with the Apex Shield Carry Kit.

This kit is a combination of the Shield Duty/Carry Action Enhancement Kit and the Shield Action Enhancement Trigger.

The APEX Shield Carry Kit Kit (SCK) was designed to provide the M&P Shield pistol owner a smooth, consistent 5 - 5.5 lb trigger pull with the advantages of shorter over-travel and more detectable trigger reset.  All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol.  The kit itself is engineered to be drop-in and should not require further gunsmithing.  However, armorer or gunsmith installation of the USB into the Shield slide is strongly recommended**

Fits Smith & Wesson Shield in 9mm and .40 S&W.

Parts Included:

  • Fully machined Sear
    • Ultimate Striker Block Kit
  • Ultimate Striker Block
  • Striker Block Spring
  • Talon Tactical tool
    • Shield Carry Spring Set
  • Sear Spring (1/8")
  • Slave Pin (to assist with trigger return spring installation)
  • 4 lb Rated Trigger Return Spring


Big Book Catalog, Issue:71, Page:233
Big Book Catalog, Issue:71, Page:236

Tactical Trigger Overwatch Precision.

$134.95
The Overwatch Precision TAC Trigger is a flat flat-faced, direct drop-in replacement for your OEM trigger. Each trigger shoe and trigger safety ...

Product Description

The Overwatch Precision TAC Trigger is a flat flat-faced, direct drop-in replacement for your OEM trigger. Each trigger shoe and trigger safety tab is machined in the USA out of 7075-T6 aluminum alloy, and affixed to an NP3 plated, Gen 3 OEM trigger bar by 316 Stainless Steel coiled spring pins. The trigger shoe and safety tab are both Type III hard coat anodized to MIL-A-8625 standard. The small indexing hook ensures consistent trigger finger placement, and the broad, flat face of the trigger allows a uniquely self-correcting, straight rearward press. The flat face reduces trigger reach is by 0.24", making this an ideal option for smaller statured shooters. Pre-travel has been reduced as much as possible without compromising firearm safety features, resulting in a clean, crisp break, and reduced overtravel. Robar's NP3 plating provides virtually impermeable corrosion resistance and smooth, grit-free operation. Note that trigger pull weight does not change from factory weight with the use of this trigger alone.

NOTE: According to manufacturer, all the Gen 3 trigger bars are completely functional and safe in Gen 4 pistols


Big Book Catalog, Issue:71, Page:234

S&w M&p Flat-Faced Forward Set Sear & Trigger Kit Apex Tactical Specialties Inc.

$161.45 - $167.99
The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a drop-in replacement for your M&P's factory trigger that produces ...

Product Description

Drop-In Upgrade Kit Takes Your M&P s Trigger from Factory to Fantastic!

The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a drop-in replacement for your M&P's factory trigger that produces a lower pull weight with less pre-travel and over-travel for a trigger pull similar to a 1911. The trigger face replicates the feel of a flat 1911 trigger, while retaining full function and reliability of S&W's pivoting passive safety lever. This kit contains:

  • Aluminum flat-faced trigger
  • Forward set sear 
  • Ultimate Striker Block Kit (striker block, spring & installation tool) 
  • Forward set spring pack (3 lb. & 4 lb. trigger return springs, sear spring, RAM spring & plastic slave pin to aid installation)

Apex's Forward Set Sear shortens the pull length by releasing the striker at a point farther forward than the factory sear, while the kit's Ultimate Striker Block has an improved radius on the striker block face that helps smooth out the pull AND eliminates the false reset problem that affects some M&Ps.

Apex includes two trigger return springs that let you choose between a 3 lb. or 4 lb. pull weight. Both are lighter than the factory pull and will give you better control for more consistent shot placement (3 lb. is not recommended for duty/carry use). The straight, flat trigger face lets you position your finger lower on the trigger for extra leverage that gives you better control to take full advantage of the lower pull weight.

The Apex Tactical Flat Faced Forward Set Sear & trigger kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. DOES NOT FIT the M2.0, Shield, BodyGuard, and .22 LR models (see note below for pre-2011 M&Ps). Installation may require minor gunsmithing: modification of the trigger bar loop.

Brownells Gun Tech(tm) Note: The Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 IF it is retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger - # 940-000-958, sold separately. If you have a pre-June 2011 pistol, the plunger/spring will be 1/16" in diameter.


Big Book Catalog, Issue:71, Page:233

SPECS: Kit includes Flat Faced Forward Set Trigger, Forward Set Sear, Ultimate Striker Block Kit(striker block, spring, and Talon Tactical Tool), Forward Set Spring Kit(white trigger return spring, green trigger return spring, polymer slave pin, sear spring, and RAM spring. Trigger only includes the Flat Faced Forward Set Trigger and polymer slave pin.

Does Not fit M&P 2.0 Pistols

Trigger Bar Detent Beretta Usa.

$6.99
Top Rated Supplier of Firearm Reloading Equipment, Supplies, and Tools - Colt

Product Description

FITS: M9A1, 9mm; Model 90-Two; Model 92, 9mm; Model 92/96 FS Compact L, 9mm; Model 92/96 INOX, 9mm


Big Book Catalog, Issue:66, Page:555
Big Book Catalog, Issue:66, Page:557